Sold Out!
Product Description
Quick ship 1911 with Surefire X300 Ultra (x200/x300) WeaponLight Holster. Does not fit the new version X300 with side screw clamp mount.
1911 5″ (will fit most shorter versions such as the 4″ and 4.25″)
Black
Right Hand
1.75″ Injection Molded Belt Loops
Related Products
Enhanced Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge.The Enhanced Trigger Guard features 1.75″ belt clip allowing easy concealed carry. The high impact polymer clip is removable and reverseable. The clip can be adjusted for a slight forward or reverse cant. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.
Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
SideKick Holster
Ares Tactical has made combination pistol and magazine IWB holsters for years by special order. There’s a pretty consistent pattern that several Kydex holster makers use. Our wasn’t that different in the basic design. We applied our critical eye on using the best materials and finishing, but essentially they looked and worked the same. The new SideKick holster is a first in its design. It takes up less belt room than the traditional style making it far more versatile in where you place it. Most pistol and mag holsters are limited to carrying in the front or AIWB (appendix Inside-the-belt). The Ares Tactical SideKick is small enough that some users will be able to place it anywhere including the strong side 3 o’clock position. The mag slot is built to handle full size magazines regardless of pistol size. Compact and subcompact magazines will fit deeper in the slot. User adjustable tension screws for both the pistol and magazine. This allows you to custom tune the draw effort needed for the pistol and magazine individually. Want even more versatility? Order the Ares Tactical SideKick Holster with UlitClips. These are a great upgrade and a most for those that need a secure IWB holster but don’t wear a belt. Mini FAQs: 1. Will the SideKick IWB holster work without a magazine? Yes, the SideKick is designed in a way that allows it to be used with or without a magazine placed in the slot. 2. Will this work with my Trijicon RMR (Burris Fast Fire, JP JPoint, etc.)? Generally, no. To keep the profile small we tuck the magazine slot close to the pistol. Some combinations of mini dot optics, mount, and compact magazines may work. 3. I see you make other holsters for my XDs 3.3 but not in the SideKick model. Why? The SideKick is made for many double stack pistols. Some double stack pistols and most single stack pistols do not work well with the intent of this design. 4. Is there an option for two or three magazines? No. Adding a second magazine substantially increases the relative size and severely restricts the versatility of the design. We recommend if you want to carry more magazine to get the Ares Tactical IWB Single Mag Carrier. 5. What are the optional deep seat clips? They are just like the regular clips but longer allowing up to one inch deeper concealment. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made.$120.00
RS 1911 4in chopped Standard Holster
In stock and ready to ship! The 1911 Rail Government Model Standard Holster chopped at 4″ Picture is just a representation of the style and is just one of several available. • 1911 4″ with Rail Gov’t model chopped, Fits most 4″, 4.25″ and 5″ rail models. May be ok with some non-railed versions. • Right Hand • Black Kydex • 1.75″ injection molded belt loops$55.00
Molle Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. The MOLLE Weaponlight Holster is similar to the standard MOLLE Holster. It provides full slide protection (when you select the Full Sweat Shield) while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is available such as the mid sweat shield, Low and low with optic cut. Supplied with dual MOLLE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting (Thumb Break option recommended). Mounting solutions using G-Code RTI system or Blade-Tech Tek-Lok can be done on a custom basis. Of course, actual adjustment range may be affected by the pistol size. If you want added versatility you can get the optional rigid belt loop is available. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The incredibly strong Kydex body withstands the rigors of being in the field. hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It is not recommended that you use this holster for you pistol without the light/laser attached for which is was molded. After you have made all of your adjustments make sure you use a medium thread locker on all your screws.$70.00
Competition Holster
Competition Holster for IDPA and USPSA Go to our new Competition Holster page. If you order on this page and not the new one linked above you will only get a Right Hand, Low Sweat Shield, and less options. The Competition Holster is perfect for IDPA and USPSA action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundreths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC member you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in it’s base position. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next IDPA competition. If you would like some other color scheme or a custom designed outer face then just Contact Us.$199.00
Bodyguard IWB V2
New! The Bodyguard V2 Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The Bodyguard V2 is not the next generation holster but just a different attachment style that many have asked to have made. The over the belt clip is sturdy and and adjustable for straight carry, FBI forward cant and reverse cant popular with some AIWB and crossdraw carriers. The Bodyguard V2 Holster also features dual adjustable tension screws. This will let you fine tune the amount of force needed to draw the holster to fit your needs. The “chopped” version is a straight cut across the muzzle that allows you to place a longer barrel version or threaded barrel. The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to reholster. The extra stiffness over the .060 is something IDPA competitors will appreciate. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. We now offer this as a option. The small bottle will do about ten holsters.$55.00
Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. Modeled similarly to The Standard Holster, the Weapon light holster can be configured for belt carry or inside-the-waistband (IWB). Pictured is a Sig Sauer P226 9mm with a Streamlight TLR-1 weapon light in OD Green. The base model comes in black with 1.75″ belt loops. Other color and attachment methods are available. The body of the holster is constructed of .080 Kydex or, for some finishes, Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. Standard belt loops are made of very rigid .125 Kydex. Optional J-Hook or soft belt loops extends the versatility of this holster to be carried inside the waistband (IWB). Like the Standard Holster, the Weaponlight Holster has belt loop positions that allow four carry heights and different angles. The highest position of the belt loops allows the pistol to sit lowest on your belt. This will roughly place the trigger guard at the belt level. The belt loops can be dropped down to the next set of eyelets making for a slightly higher ride. Flipping the belt loops upside down with further raise the ride of the holster. Inverting the belt loops for a very high ride, as with any holster, should only be done with a stiff belt. As always , if you do not see your pistol, light, or bells and whistles listed below please contact us. We do a lot of custom work and strive to deliver just what you want. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$65.00