Product Description
The Standard holster available in a variety of colors and camouflage patterns. Shown here is FDE (flat dark earth) and is just one of the 30+ colors available. It comes standard in black with 1.75″ injection molded belt loops. Optional, tuckable, J hook, and/or pull the dot belt loops allow inside the waistband (IWB) carry for added versatility and concealability. It’s like getting two holsters in one.
This is the best all around holster available. The pancake holster style fits close to the body that allows excellent concealment yet offers quick access when you need it.
New in December 2021 is the option to choose your own sweat shield size. The sweat shield is the body side part of the holster that covers the slide. A full would extend to the rear of the slide. A low would be close to the rear of the grip. Low with RMR/MRD reduces the sweat shield from the top of the slide for slide mounted red dots.
The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. The Standard Holster and belt loop position allows for six carry heights and different angles for most full size pistols. Adjustment will vary depending on pistol length. The highest position of the belt loops allows the pistol to sit lowest on your belt. This will roughly place the trigger guard at the belt level. The belt loops can be dropped down to the next set of eyelets making for a slightly higher ride. Flipping the belt loops upside down with further raise the ride of the holster. Inverting the belt loops for a very high ride, as with any holster, should only be done with a stiff belt. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter.
If you don’t see your pistol listed below check out our updated Pistol and Revolver page.
Additional information
| RIght or Left | Lefty, Righty |
|---|---|
| Belt Size | 1.5in, 1.5in Infinity Loop, 1.75in Standard, 1.75in Infinity Loop |
| Sweat Shield | Low w. RMR/MRD, Low, Mid, Full |
Related Products
Enhanced Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge.The Enhanced Trigger Guard features 1.75″ belt clip allowing easy concealed carry. The high impact polymer clip is removable and reverseable. The clip can be adjusted for a slight forward or reverse cant. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.
Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
Patriotic Holster
Just in time for the 4th of July. Show off your patriot pride with this great Red, White, and Blue holster based on our Standard Holster. EMT red backing and Police Blue Kydex face are accented with white eyelets. Also hand styled shape (varies by pistol model) helps bring out the offset edge reveal (called our Thin Blue Line on the competition holsters). Something truly unique but highly functional.$90.00
Competition Holster
Competition Holster for IDPA, USPSA, & 3Gun The Competition Holster is perfect for IDPA, USPSA, and 3Gun action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundredths of a second this is the holster you want on your side. Dual retention screws, most models, lets you fine tune the draw effort and feel. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting the most stringent IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also makes it compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights that do no extend past the slide width. If yours is different, let us know and we can typically accommodate your needs. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC shooter you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the standard Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in its base position. Other custom belt attachment models are available such as the Safariland QLS & ELS. We can even custom mold a holster to your preferred belt attachment. Vistit the Belt Accessory Page or just contact us. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal for two tone competition holsters. Single layer holsters should choose flush. Two-tone dual layer competition holster can choose any option. The bevel is tapers the outer layer in most visible areas and adds a nice polished transition to the inner layer. This is our most popular option just beating out the Thin Blue Line (TBL) reveal. The Thin Blue Line reveal was originally made just for our Law Enforcement customers but we had such a demand we added it as a option for everyone, in every color nad kept the name. This is roughly an 1/8 inch set back on the outer layer letting more of the inner layer be visible. Bevel and TBL are not possible on single layer holsters, though the system will let you pay for it. We have added the option to choose your sweat shield coverage. Sometimes call a shirt guard, the sweat shield is the part of the holster between the rear of the slide and your body. Low cut is the shortest and typically ends just above the belt attachment point. The full is the tallest, covering most of the slide. Different slide profiles and grips will vary just how much is covered on the full option. If you are a high thumbs forward gripper any sweat shield will work. Low thumbs forward grippers tend to like the low shield coverage. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next competition. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made. If you would like some other color scheme or a custom designed outer face then just Contact Us.$80.00
Double Duty OWB IWB Holster
New! The Ares Tactical Double Duty Holster is two holsters in one. Key Features: • Rugged Kydex construction • Dual Tension screws (most models) for custom draw • Flared opening for easier holstering • Wrap Around Muzzle coverage protects the front sight • Made in the USA by Veterans Are you tire of having to compromise when buying a holster? Do you get the OWB or IWB or spend twice the money and get two? Is your box full of holsters to cover every carry method? Simplify life and get the Ares Tactical Double Duty Holster. This is available in a variety of colors and camouflage patterns. For OWB (Outside the waistband carry we use the BladeTeck Tek Lok. It is configurable for belts from 1.25 inches to 2.25 inches. You can also adjust the ride height and cant (forward and back). The back cant is popular with USPSA shooters and people looking for a crossdraw. The outside has a IWB overhook loop standard. The Ulticlip is popular available option for a minimal visual profile. It also allows you to carry the holster without wearing a belt or clipping inside your purse, pack, or double AR/AR mag pouch. The user can easily remove the side they don’t need at the time with a Philips head screwdriver. It take only seconds to swap back. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to chemicals and environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best balance of properties. The .060 thickness will do the job but feels flimsy to most people and is not nearly as strong for an OWB holster. Ares Tactical offers 21 different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It’s like getting two holsters in one. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$75.00
RS 1911 4.25″ Chopped Standard Holster
In stock and ready to ship! The 1911 Government Model Standard Holster chopped at 4.25″ Picture is just a representation of the style and is just one of several available. • 1911 4″ with Rail Gov’t model chopped, Fits most 4″, 4.25″ and 5″ models. • Right Hand • Black Kydex • 1.75″ injection molded belt loops$55.00
Hybrid Holster
Hybrid holsters have been very popular over the last decade. Providing the conforming nature of leather on the backside and the rugged form fitted Kydex on the outside blends the two spectrum’s of holster design. This is the Ares Tactical take featuring sturdy leather back and .080 Kydex. The Kydex Holster design allows you to have multiple shells and one leather backer. The opening is slightly flared to make holstering easier. The full wrap muzzle is standard. This protects the front sight from damage or become caught up on your clothes. As an added benefit it keeps your clothes clean from powder and oil from the slide and muzzle. Also, the wrapped muzzle reduces sharp edges and wear that can tear holes in your pants. Notice the rounded and treated edges of the leather. We take the extra time to do this because it makes carrying more comfortable and it looks good too. IWB Soft loops are a great option for those wanting something more secure that the traditional metal clips. The pull-the-dot snaps allow easy on and off. You can also choose tuckable injection molded belt clips. Cant angle can be fine tuned via front and back adjustment holes. Multiple shells are available for only $20. This allows you to use the same backer and reduce costs. Contact us for ordering. Don’t forget to check out our Ready to Ship page. This is where we list some overstock items (QS Quick Ship) as well as prototypes, blemished, and other non standard items (RS Ready Ship).$500.00
Bodyguard IWB V2
New! The Bodyguard V2 Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The Bodyguard V2 is not the next generation holster but just a different attachment style that many have asked to have made. The over the belt clip is sturdy and and adjustable for straight carry, FBI forward cant and reverse cant popular with some AIWB and crossdraw carriers. The Bodyguard V2 Holster also features dual adjustable tension screws. This will let you fine tune the amount of force needed to draw the holster to fit your needs. The “chopped” version is a straight cut across the muzzle that allows you to place a longer barrel version or threaded barrel. The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to reholster. The extra stiffness over the .060 is something IDPA competitors will appreciate. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. We now offer this as a option. The small bottle will do about ten holsters.$55.00