Product Description
The Standard holster available in a variety of colors and camouflage patterns. Shown here is FDE (flat dark earth) and is just one of the 30+ colors available. It comes standard in black with 1.75″ injection molded belt loops. Optional, tuckable, J hook, and/or pull the dot belt loops allow inside the waistband (IWB) carry for added versatility and concealability. It’s like getting two holsters in one.
This is the best all around holster available. The pancake holster style fits close to the body that allows excellent concealment yet offers quick access when you need it.
New in December 2021 is the option to choose your own sweat shield size. The sweat shield is the body side part of the holster that covers the slide. A full would extend to the rear of the slide. A low would be close to the rear of the grip. Low with RMR/MRD reduces the sweat shield from the top of the slide for slide mounted red dots.
The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. The Standard Holster and belt loop position allows for six carry heights and different angles for most full size pistols. Adjustment will vary depending on pistol length. The highest position of the belt loops allows the pistol to sit lowest on your belt. This will roughly place the trigger guard at the belt level. The belt loops can be dropped down to the next set of eyelets making for a slightly higher ride. Flipping the belt loops upside down with further raise the ride of the holster. Inverting the belt loops for a very high ride, as with any holster, should only be done with a stiff belt. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter.
If you don’t see your pistol listed below check out our updated Pistol and Revolver page.
Additional information
| RIght or Left | Lefty, Righty |
|---|---|
| Belt Size | 1.5in, 1.5in Infinity Loop, 1.75in Standard, 1.75in Infinity Loop |
| Sweat Shield | Low w. RMR/MRD, Low, Mid, Full |
Related Products
Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
SideKick Holster
Ares Tactical has made combination pistol and magazine IWB holsters for years by special order. There’s a pretty consistent pattern that several Kydex holster makers use. Our wasn’t that different in the basic design. We applied our critical eye on using the best materials and finishing, but essentially they looked and worked the same. The new SideKick holster is a first in its design. It takes up less belt room than the traditional style making it far more versatile in where you place it. Most pistol and mag holsters are limited to carrying in the front or AIWB (appendix Inside-the-belt). The Ares Tactical SideKick is small enough that some users will be able to place it anywhere including the strong side 3 o’clock position. The mag slot is built to handle full size magazines regardless of pistol size. Compact and subcompact magazines will fit deeper in the slot. User adjustable tension screws for both the pistol and magazine. This allows you to custom tune the draw effort needed for the pistol and magazine individually. Want even more versatility? Order the Ares Tactical SideKick Holster with UlitClips. These are a great upgrade and a most for those that need a secure IWB holster but don’t wear a belt. Mini FAQs: 1. Will the SideKick IWB holster work without a magazine? Yes, the SideKick is designed in a way that allows it to be used with or without a magazine placed in the slot. 2. Will this work with my Trijicon RMR (Burris Fast Fire, JP JPoint, etc.)? Generally, no. To keep the profile small we tuck the magazine slot close to the pistol. Some combinations of mini dot optics, mount, and compact magazines may work. 3. I see you make other holsters for my XDs 3.3 but not in the SideKick model. Why? The SideKick is made for many double stack pistols. Some double stack pistols and most single stack pistols do not work well with the intent of this design. 4. Is there an option for two or three magazines? No. Adding a second magazine substantially increases the relative size and severely restricts the versatility of the design. We recommend if you want to carry more magazine to get the Ares Tactical IWB Single Mag Carrier. 5. What are the optional deep seat clips? They are just like the regular clips but longer allowing up to one inch deeper concealment. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made.$120.00
Shoulder Holster
From Miami Vice to Dirty Harry or a Yippee Ki-Yay NYC police detective, the shoulder holster has played an iconic role in movies and television. The Ares Tactical Shoulder Holster is an updated lightweight version using Kydex. This is a significant weight saving over older traditional leather versions and fit better than nylon models. We offer both horizontal and vertical carry holsters. Both models features an optional removable belt tie down. Each holster has a tension adjustment so you can adjust the retention to meet your desire. You can add a double magazine carrier on the other side. This really helps balance the rig and is a great way to have extra magazines at the ready. The shoulder harness is x-rig design that distributes weight well and helps to keep you holster and ammo where you place them. On the off side you can add a double magazine pouch or a combination magazine and flashlight pouch. Besides having those extra items you should be carrying easily at hand is provides great balance if you are not tying your holster into your belt. All shoulder holsters require greater care and training as compared to strong side belt holsters such as our Standard Holster. The disadvantages are it is very easy to sweep (muzzle) yourself and others on the draw. Also, it can be troublesome for people back problems. There are also some significant advantages wearing a shoulder holster. Among the advantages of a shoulder holster is access while seated. This is particularly true when you are strapped into your car seat. You can also stage your hand on the weapon under your jacket and still be concealed and inconspicuous. The shoulder rig is a great way to have your pistol and magazines at the ready for those bumps in the night. Many people find the shoulder holster in more convenient to draw with either hand. Tie down straps simple screw onto your kydex holster or mag holder and snap around your belt. We recommend at least one when choosing the vertical shoulder holster configuration. Don’t forget to pick up some threadlocker to secure all your screws after making the adjustments. We now offer A La Carte Shoulder Holster parts. These can be used with our harness or many other brands. Pistol Carriers: Magazine and Combo Mag & Light Pouches: Shoulder Harnesses Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made.$135.00
Paddle Holster
Designed for comfortable all day carry, the Paddle Holster is far easier to put on and remove than a belt holster. Low cut sight channel aids in quickly clearing holster in getting on target. Flared top makes one-handed reholstering easy. The recurved wings on the paddle back help aid retention.$70.00
Molle Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. The MOLLE Weaponlight Holster is similar to the standard MOLLE Holster. It provides full slide protection (when you select the Full Sweat Shield) while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is available such as the mid sweat shield, Low and low with optic cut. Supplied with dual MOLLE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting (Thumb Break option recommended). Mounting solutions using G-Code RTI system or Blade-Tech Tek-Lok can be done on a custom basis. Of course, actual adjustment range may be affected by the pistol size. If you want added versatility you can get the optional rigid belt loop is available. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The incredibly strong Kydex body withstands the rigors of being in the field. hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It is not recommended that you use this holster for you pistol without the light/laser attached for which is was molded. After you have made all of your adjustments make sure you use a medium thread locker on all your screws.$70.00
Bodyguard IWB V2
New! The Bodyguard V2 Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The Bodyguard V2 is not the next generation holster but just a different attachment style that many have asked to have made. The over the belt clip is sturdy and and adjustable for straight carry, FBI forward cant and reverse cant popular with some AIWB and crossdraw carriers. The Bodyguard V2 Holster also features dual adjustable tension screws. This will let you fine tune the amount of force needed to draw the holster to fit your needs. The “chopped” version is a straight cut across the muzzle that allows you to place a longer barrel version or threaded barrel. The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to reholster. The extra stiffness over the .060 is something IDPA competitors will appreciate. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. We now offer this as a option. The small bottle will do about ten holsters.$55.00
Bodyguard IWB Holster
The Bodyguard IWB Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. This Kydex holster is ambidextrous and can be configured for right and left hand carry. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The tuckable J-hook allows for full concealment with minimal hook showing. An optional pull-the-dot soft loop kit is available for $10. Also consider the new UltiClip. This is a great solution for those men and women who do not wear belts or want an even more concealed carry Kydex holster The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to holster. The extra stiffness over the .060 is something IDPA competitors will appreciate. The J-hook made of very strong .125 Kydex. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. This is a IWB Kydex Holster you can wear all day and love the comfort and security it offers. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. This is available as a option if you do not have any already.$60.00