Product Description
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution.
Each Single IWB Mag carrier features an adjustable tension screw so you can set it to your preference.
If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch.
When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right?
There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish.
As always, if you have a question please Contact Us.
Additional information
| IWB Attachment | Belt Clip 1.75, J Hook, Soft Loop |
|---|---|
| RIght or Left | Lefty, Righty |
| Pistol Magazine | 1911, Beretta 92, CZ75, FN 45, Glock 17, Glock 20, Glock 42, Glock 43, HK USP 45, HK VP9, SA XD 45, SA XD 9/40, SA XDm 45, SA XDm 9/40, SA XDs 45, SA XDs 9/40, SIg P226, Sig P229, Sig P229 E-1, Sig P320, Sig P365, SW M&P 45, SW M&P 9/40, SW M&P Shield 45acp, SW M&P Shield 9/40, Universal 9/40, Walther PPQM2 9/40 |
Related Products
LIC Rig
The LIC Rig is a great choice for those operating in one of the many Low Intensity Conflict (LIC) areas around the world. It provides the user with an easy way to conceal several AR15 or pistol magazines providing a full combat load. All of this in a convenient concealed carry solution. Escalating tensions domestically call for you to up your capabilities. The LIC Rig provides a compact and lightweight AR mag carrier that you can easily pack in a briefcase, backpack, or under your seat until needed. Donning this shoulder rig only takes seconds. The modular design allows you to be flexible in an ever changing environment. Additional panels are available for pistol mags, combination AR/pistol, and utility pocket for things like pocket med kits. You can also replace one side with a pistol holster from our Shoulder Holster parts. The X-Harness shoulder strap design provides good weight distribution as well as a carry adjustment. Adjustments to the mil-spec one inch webbing are easy to make. Swapping panels out only takes a minute. The original concept of the LIC Rig came from a customer who wanted something like what was used in the 1995 movie Heat. The bank robbery scene featured a vest that held six AR mags under a suit coat. While this works well if you are wearing a three piece suit it is not low profile in a lot of other scenarios. This shoulder harness combines the capacity of the original design with a solution that is easier to conceal. A note on sizing: Model is 6’2″ (187cm) and wears a Large/42L. Concealing 30rd AR magazines on small frame persons or improperly fitted rig can lead to printing . Take a few minutes and hold a mag on your side and check to see if this will be a good fit for you before ordering. Returns are subject to restocking fees$100.00
SOK Def Can Carrier 25
Belt carrier for the SOK Def 2.5oz can. Now you can have a zero stress solution on how to carry your non-lethal self defense spray that is gaining popularity with police, security teams, and prepared civilians. The open top design allows quick and easy access but the dual tension screws allows just the right amount of hold you need. Each pouch is hand made in the USA by veterans using USA made Kydex and Holstex material. These thermoformed plastics offer outstanding durability and near impervious to the weather. We stock dozens of different colors, camo patterns (Multicam, M81 woodland, etc), and textures (leather, carbon fiber, etc.) Comes standard with locking clam shell belt attachment that can be sized for belts between 1″ dress belts, 1.5″ & 1.75″ shooting and tactical belts and up 2″ for many duty belts. Comes with hardware to adjust belt ride at three different levels. This can be also mounted to MOLLE belts/vests/packs with option molle clips or Molle-Lok. The SOK (soak) system is an odorless water soluble lubric gel that was developed to address many of the legal, moral and strategic issues associated with the use of pepper sprays. Though capable of immediately incapacitating an assailant or suspect, SOK can be deployed in crowded, confined or unventilated areas with absolutely zero toxicological, environmental or respiratory collateral or lasting effects. ZERO!! (sokdef) This personal-sized self defense spray is a solution that many people have been wanting for a long time. The non lethal and less lethal market has hundreds of solutions. Some are good and many are not worth you time and a few are even dangerous to the user. The SOK (said like “soak”) streams out a sticky and powerful product that immediately stops attackers. To risk or blowback from the wind, no risk of contaminating your car or environment, not explosive or flammable and can be used indoors.$35.00
Double Shell Holder
The Double Shell Holder is designed to get you quick access to two 12ga shot shells. The single centralized tension screw allows the user to fine tune the grip on your shells. This can give you the exact hold you need for vigorous combative activities or more casual field and range usage. The Double Shell Holder uses Blade Tech Tek-Lok bet attachment. This highly versatile mount allows you to properly size it for belts up to 2.25″ wide. This is a vast improvement in stability over other designs that do not have adjustments for different belt widths. The width of the TekLok also provides stability left and right over skinny clip type holders. The holder is designed to allow easy access to the shells weather you choose to hinged Tek Lok on the top or bottom. While having the hinge of the clamshell style Tek Lok is most common some prefer the have the hinge on the bottom so that the locking mechanism faces up. Some find this easier to put on and take off the belt. Using an optional Molle Clip or Molle-Lok will allow you to take the Double Shell Holder and mount it to your tactical vest, plate carrier, or battle belt. The body of the shot shell holder is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties in terms of durability and weight. The .060 thickness will do the job but feels flimsy to most people. The picture above shows standard 2 3/4″ shotgun shells in the holder. You could use shorter shells or the longer 3″ and 3 1/2″ length rounds. If you have any questions just reach out to us using the contact information at the bottom of the page.$30.00
AR Mag Pouch
The Single AR Mag Pouch is a convenient way to carry a spare rifle magazine on your belt. It is available for the AR15 and SR25 magazines and fit most magazines. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each pouch features Speed Chute. This flared opening allows easier insertion of magazines. This is great to have if you do a lot of training or just want to cut down on the frustration of perfectly lining up your magazine to fit in a mag pouch. There are some of the adjustment for ride height and cant by changing the position of the belt loops. Don’t forget you we also offer optional inside the waistband (IWB) J-Hooks or soft loops for deeper concealment solutions. When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets facing rearward. If you wear the Righty on the right side the bullets will face forwards. The Lefty, when worn on the right side, will have the bullets facing backwards. Easy enough, right? These rifle magazine pouches are based off MagPul magazines but work for most other rifle magazines too. As such, PMags will have more positive snap fit like on a regular pistol holster versus the friction fit on most magazine pouches. We offer dozens of different Kydex colors, camos, and patterns. If you don’t see what you want just contact us and we can probably get what you want. When ordering, your pouch will come with one set of belt loops that you choose. The Extras and Spares are in addition to what you choose at the top. There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made. As always, if you have a question please Contact Us.$35.00
Double Duty OWB IWB Holster
New! The Ares Tactical Double Duty Holster is two holsters in one. Key Features: • Rugged Kydex construction • Dual Tension screws (most models) for custom draw • Flared opening for easier holstering • Wrap Around Muzzle coverage protects the front sight • Made in the USA by Veterans Are you tire of having to compromise when buying a holster? Do you get the OWB or IWB or spend twice the money and get two? Is your box full of holsters to cover every carry method? Simplify life and get the Ares Tactical Double Duty Holster. This is available in a variety of colors and camouflage patterns. For OWB (Outside the waistband carry we use the BladeTeck Tek Lok. It is configurable for belts from 1.25 inches to 2.25 inches. You can also adjust the ride height and cant (forward and back). The back cant is popular with USPSA shooters and people looking for a crossdraw. The outside has a IWB overhook loop standard. The Ulticlip is popular available option for a minimal visual profile. It also allows you to carry the holster without wearing a belt or clipping inside your purse, pack, or double AR/AR mag pouch. The user can easily remove the side they don’t need at the time with a Philips head screwdriver. It take only seconds to swap back. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to chemicals and environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best balance of properties. The .060 thickness will do the job but feels flimsy to most people and is not nearly as strong for an OWB holster. Ares Tactical offers 21 different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It’s like getting two holsters in one. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$75.00
Paddle Holster
Designed for comfortable all day carry, the Paddle Holster is far easier to put on and remove than a belt holster. Low cut sight channel aids in quickly clearing holster in getting on target. Flared top makes one-handed reholstering easy. The recurved wings on the paddle back help aid retention.$70.00
Molle Holster
The MOLLE Holster provides full slide protection while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is also available. Supplied with dual MALICE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting. Mounting solutions using G-Code RTI system, Safariland QLS and ELS, or Blade-Tech Tek-Lok can be done on a custom basis too. If you want added versatility you can get the optional rigid belt loop is available for $10. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The nearly indestructible Kydex body withstands the rigors of being in the field. Hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. New for 2015 are the adjustable tension screws. This will allow you to easily fine tune the retention of your holster. New for 2017 are the options for slide coverage. The original model featured a full sweat shield that went up slide and protected the rear sight from all sorts of battlefield abuses. Over the years we have many requests for lower custom cuts to allow for quicker muzzle presentation which we were happy to accommodate. You now have the option for lower clearances.$70.00
