Product Description
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution.
Each Single IWB Mag carrier features an adjustable tension screw so you can set it to your preference.
If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch.
When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right?
There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish.
As always, if you have a question please Contact Us.
Additional information
| IWB Attachment | Belt Clip 1.75, J Hook, Soft Loop |
|---|---|
| RIght or Left | Lefty, Righty |
| Pistol Magazine | 1911, Beretta 92, CZ75, FN 45, Glock 17, Glock 20, Glock 42, Glock 43, HK USP 45, HK VP9, SA XD 45, SA XD 9/40, SA XDm 45, SA XDm 9/40, SA XDs 45, SA XDs 9/40, SIg P226, Sig P229, Sig P229 E-1, Sig P320, Sig P365, SW M&P 45, SW M&P 9/40, SW M&P Shield 45acp, SW M&P Shield 9/40, Universal 9/40, Walther PPQM2 9/40 |
Related Products
LIC Rig
The LIC Rig is a great choice for those operating in one of the many Low Intensity Conflict (LIC) areas around the world. It provides the user with an easy way to conceal several AR15 or pistol magazines providing a full combat load. All of this in a convenient concealed carry solution. Escalating tensions domestically call for you to up your capabilities. The LIC Rig provides a compact and lightweight AR mag carrier that you can easily pack in a briefcase, backpack, or under your seat until needed. Donning this shoulder rig only takes seconds. The modular design allows you to be flexible in an ever changing environment. Additional panels are available for pistol mags, combination AR/pistol, and utility pocket for things like pocket med kits. You can also replace one side with a pistol holster from our Shoulder Holster parts. The X-Harness shoulder strap design provides good weight distribution as well as a carry adjustment. Adjustments to the mil-spec one inch webbing are easy to make. Swapping panels out only takes a minute. The original concept of the LIC Rig came from a customer who wanted something like what was used in the 1995 movie Heat. The bank robbery scene featured a vest that held six AR mags under a suit coat. While this works well if you are wearing a three piece suit it is not low profile in a lot of other scenarios. This shoulder harness combines the capacity of the original design with a solution that is easier to conceal. A note on sizing: Model is 6’2″ (187cm) and wears a Large/42L. Concealing 30rd AR magazines on small frame persons or improperly fitted rig can lead to printing . Take a few minutes and hold a mag on your side and check to see if this will be a good fit for you before ordering. Returns are subject to restocking fees$100.00
Glock Knife Sheath v1
The Glock Field Knife is an excellent knife. There are many thousands in use around the world for good reason. The biggest complaint that most users have is the included sheath. It lacks various mounting options, is difficult to take out, and for some make too much noise. The Ares Tactical Glock Knife Sheath for the Glock M78 and M81 Field Knife solves these problems. We built a two piece sheath, sometimes called a pancake because of the layers looking like a stack of flapjacks. This design allow for many different mounting options. If you are wanting a molle clip, closed belt loop, IWB soft loop, or Ulticlip we have it for you. Attachment options are selected in the OPTIONS section below. The second most complained about problem with the factory knife sheath is the knife is too difficult to take out. This is especially true if you are wearing gloves. Knife retention is the most difficult issue to solve for a sheath. Too loose and you know that knife will probably be lost in the woods somewhere. To tight like the factory and you struggle to release it when you need it most. What the Ares Tactical Glock Knife Sheath has done is designed a sheath that locks in place but can easily be removed when you grip the handle and press the back locking tab. For those only wanting a friction fit that is an option. Another benefit of our design is the opening gives you more than a 50% increase in the opening at the top. This will make it easier to put you knife away. Like I say when holstering a pistol, it it still a good idea to look the knife into the sheath. No sense is stabbing your gear or self to save a second or two on securing the blade. Molding the Kydex to the knife provides a tighter fit to the blade. This reduces rattle or slap inside the sheath from the knife banging into the sheath. This also means anything hitting the outside of the sheath will be quieter too. These are molded for RIGHT HAND use. If you want a left hand version choose that in the options section. There are currently three width sizing on the Glock Knife Sheath V1. This helps you fine tune the sheath to your needs. The standard width is the narrowest width. Spacing is soley based on the width of the knife blade. Next wider option is the Standard Molle width. This is for attaching to the standard webbing stitched every 1.5″ wide. This gives you about 1.4″ room between the stitches. When you have something using laser cut molle slots the opening is about 1.1″ but still 1.5″ to the next opening. So, your wiggle room using standard 1″ wide straps is minimized. This means the Standard Molle Width snuggly fits in two MOLLE columns. The Laser Cut MOLLE take three vertical columns. Updated Option Feb 2024: We are now offering a steel pommel modification to Glock knives at time of purchase. This cold-blued steel pommel is great for crushing things with the butt of your knife or hammering in nails or tent stakes. It also gives you easier access to the storage area inside the handle. The added weight also shifts the balance from blade forward to the handle. This is change in balance is preferred by many knife fighters as it make changes in direction quicker. Our version of the sheath has a bottom and side drain hole. This allows plenty of drainage for when it gets wet. As with any knife you should dry and oil it as soon as possible if it gets wet. The standard sheath is about 3″ wide. There is a wider version that is about 3.8″ wide that allows both columns of eyelets to align with three width molle section.$40.00
Single Mag Pouch Clip On
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each Single Mag carrier features an adjustable tension screw so you can set it to your preference. The polymer belt clip allows you to easily put on your mag pouches without having to take your belt off. When ordering you can specify righty or lefty. The Righty is worn on the left side OWB with the bullets forward. If you wear the Righty on the right side the bullets will face backwards and the tension screws forward. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right? Can I use this IWB? Yes, these can be used inside the waistband but right and left hand build is determined by the outside the waistband designation. So, if you want to carry on your left side inside your pants order the LEFTY. As always, if you have a question please Contact Us.$30.00
Competition Mag Pouch GM edition
The Competition Mag Pouch GM Edition is perfect for action shooting matches, range use, or everyday carry. The perfect companion to our Competition Holster or use on it’s own. If you measure time by the hundereths of a second this is the Mag Pouch you want on your side. This special GM Edition was specially designed with the input of top level competitors looking to squeeze out every bit of advantage possible. A flair has been added to our standard speed chute to further expand the opening. This combined with the FatBack feature makes stowing magazines on the clock or in practice quick and effortless. Dual retention screws lets you fine tune the draw effort. The contact area with the magazine has been minimized for the quickest release possible. The low cut front is a popular feature allowing your finger to index on the front of the magazine. The belt clip is available in 1.5″ and 1.75″ (standard). The Speed Chute flared opening is added for easier inserting. This allows the shooter to return the magazine easily. A great feature especially appreciated by IDPA shooters. Order the single color or two-tone model. The single color uses only the Base Color Option. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. The FATBACK started with a conversation that began with, “Hey Matt, I’m kinda fat…” about our standard double mag pouch. He wanted a sweat guard that came up partially on the back side that made inserting magazines less painful if his Dunlap hung over the pouch opening. In playing with this idea we found that in combination with our speed chute flaring that inserting magazines became quick and effortless. That saves you time on the practice range. Also, we have seen several higher level matches start the stage off with magazines on the table and require you to stow them. This feature is great for that and is standard on the GM edition and an option on our regular competition mag pouches. If you would like some other color scheme or a custom designed outer face then just Contact Us.$50.00
OWB to IWB Soft Loop Conversion Kit
Many OWB (Outside the Waistband) holsters including the Ares Tactical Standard Holster can easily be converted to IWB carry with this convenient conversion kit. Our soft loop kit includes all the hardware you need for most makers brand OWB holsters. The soft loop is an ultra strong synthetic laminate designed for years of use. It can be set for a variety of belt sizes up to 2 inches. The MilSpec Pull-the-Dot snaps ensure your loop stays snapped until you decide to remove it. Key Features: • 1.5″, 1.75″, and 2″ adjustment holes punched for convenient sizing to your belt • Laminated synthetic soft loop for years of all season use • MilSpec Pull-the-Dot snaps • Hardware included • Fits most OWB holsters with eyelets$20.00
Molle Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. The MOLLE Weaponlight Holster is similar to the standard MOLLE Holster. It provides full slide protection (when you select the Full Sweat Shield) while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is available such as the mid sweat shield, Low and low with optic cut. Supplied with dual MOLLE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting (Thumb Break option recommended). Mounting solutions using G-Code RTI system or Blade-Tech Tek-Lok can be done on a custom basis. Of course, actual adjustment range may be affected by the pistol size. If you want added versatility you can get the optional rigid belt loop is available. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The incredibly strong Kydex body withstands the rigors of being in the field. hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It is not recommended that you use this holster for you pistol without the light/laser attached for which is was molded. After you have made all of your adjustments make sure you use a medium thread locker on all your screws.$70.00
Bodyguard IWB Holster
The Bodyguard IWB Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. This Kydex holster is ambidextrous and can be configured for right and left hand carry. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The tuckable J-hook allows for full concealment with minimal hook showing. An optional pull-the-dot soft loop kit is available for $10. Also consider the new UltiClip. This is a great solution for those men and women who do not wear belts or want an even more concealed carry Kydex holster The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to holster. The extra stiffness over the .060 is something IDPA competitors will appreciate. The J-hook made of very strong .125 Kydex. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. This is a IWB Kydex Holster you can wear all day and love the comfort and security it offers. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. This is available as a option if you do not have any already.$60.00