Product Description
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution.
Each Single IWB Mag carrier features an adjustable tension screw so you can set it to your preference.
If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch.
When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right?
There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish.
As always, if you have a question please Contact Us.
Additional information
| IWB Attachment | Belt Clip 1.75, J Hook, Soft Loop |
|---|---|
| RIght or Left | Lefty, Righty |
| Pistol Magazine | 1911, Beretta 92, CZ75, FN 45, Glock 17, Glock 20, Glock 42, Glock 43, HK USP 45, HK VP9, SA XD 45, SA XD 9/40, SA XDm 45, SA XDm 9/40, SA XDs 45, SA XDs 9/40, SIg P226, Sig P229, Sig P229 E-1, Sig P320, Sig P365, SW M&P 45, SW M&P 9/40, SW M&P Shield 45acp, SW M&P Shield 9/40, Universal 9/40, Walther PPQM2 9/40 |
Related Products
SOK Def Can Carrier 25
Belt carrier for the SOK Def 2.5oz can. Now you can have a zero stress solution on how to carry your non-lethal self defense spray that is gaining popularity with police, security teams, and prepared civilians. The open top design allows quick and easy access but the dual tension screws allows just the right amount of hold you need. Each pouch is hand made in the USA by veterans using USA made Kydex and Holstex material. These thermoformed plastics offer outstanding durability and near impervious to the weather. We stock dozens of different colors, camo patterns (Multicam, M81 woodland, etc), and textures (leather, carbon fiber, etc.) Comes standard with locking clam shell belt attachment that can be sized for belts between 1″ dress belts, 1.5″ & 1.75″ shooting and tactical belts and up 2″ for many duty belts. Comes with hardware to adjust belt ride at three different levels. This can be also mounted to MOLLE belts/vests/packs with option molle clips or Molle-Lok. The SOK (soak) system is an odorless water soluble lubric gel that was developed to address many of the legal, moral and strategic issues associated with the use of pepper sprays. Though capable of immediately incapacitating an assailant or suspect, SOK can be deployed in crowded, confined or unventilated areas with absolutely zero toxicological, environmental or respiratory collateral or lasting effects. ZERO!! (sokdef) This personal-sized self defense spray is a solution that many people have been wanting for a long time. The non lethal and less lethal market has hundreds of solutions. Some are good and many are not worth you time and a few are even dangerous to the user. The SOK (said like “soak”) streams out a sticky and powerful product that immediately stops attackers. To risk or blowback from the wind, no risk of contaminating your car or environment, not explosive or flammable and can be used indoors.$35.00
Glock Knife Sheath v1
The Glock Field Knife is an excellent knife. There are many thousands in use around the world for good reason. The biggest complaint that most users have is the included sheath. It lacks various mounting options, is difficult to take out, and for some make too much noise. The Ares Tactical Glock Knife Sheath for the Glock M78 and M81 Field Knife solves these problems. We built a two piece sheath, sometimes called a pancake because of the layers looking like a stack of flapjacks. This design allow for many different mounting options. If you are wanting a molle clip, closed belt loop, IWB soft loop, or Ulticlip we have it for you. Attachment options are selected in the OPTIONS section below. The second most complained about problem with the factory knife sheath is the knife is too difficult to take out. This is especially true if you are wearing gloves. Knife retention is the most difficult issue to solve for a sheath. Too loose and you know that knife will probably be lost in the woods somewhere. To tight like the factory and you struggle to release it when you need it most. What the Ares Tactical Glock Knife Sheath has done is designed a sheath that locks in place but can easily be removed when you grip the handle and press the back locking tab. For those only wanting a friction fit that is an option. Another benefit of our design is the opening gives you more than a 50% increase in the opening at the top. This will make it easier to put you knife away. Like I say when holstering a pistol, it it still a good idea to look the knife into the sheath. No sense is stabbing your gear or self to save a second or two on securing the blade. Molding the Kydex to the knife provides a tighter fit to the blade. This reduces rattle or slap inside the sheath from the knife banging into the sheath. This also means anything hitting the outside of the sheath will be quieter too. These are molded for RIGHT HAND use. If you want a left hand version choose that in the options section. There are currently three width sizing on the Glock Knife Sheath V1. This helps you fine tune the sheath to your needs. The standard width is the narrowest width. Spacing is soley based on the width of the knife blade. Next wider option is the Standard Molle width. This is for attaching to the standard webbing stitched every 1.5″ wide. This gives you about 1.4″ room between the stitches. When you have something using laser cut molle slots the opening is about 1.1″ but still 1.5″ to the next opening. So, your wiggle room using standard 1″ wide straps is minimized. This means the Standard Molle Width snuggly fits in two MOLLE columns. The Laser Cut MOLLE take three vertical columns. Updated Option Feb 2024: We are now offering a steel pommel modification to Glock knives at time of purchase. This cold-blued steel pommel is great for crushing things with the butt of your knife or hammering in nails or tent stakes. It also gives you easier access to the storage area inside the handle. The added weight also shifts the balance from blade forward to the handle. This is change in balance is preferred by many knife fighters as it make changes in direction quicker. Our version of the sheath has a bottom and side drain hole. This allows plenty of drainage for when it gets wet. As with any knife you should dry and oil it as soon as possible if it gets wet. The standard sheath is about 3″ wide. There is a wider version that is about 3.8″ wide that allows both columns of eyelets to align with three width molle section.$40.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Paddle Holster
Designed for comfortable all day carry, the Paddle Holster is far easier to put on and remove than a belt holster. Low cut sight channel aids in quickly clearing holster in getting on target. Flared top makes one-handed reholstering easy. The recurved wings on the paddle back help aid retention.$70.00
Molle Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. The MOLLE Weaponlight Holster is similar to the standard MOLLE Holster. It provides full slide protection (when you select the Full Sweat Shield) while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is available such as the mid sweat shield, Low and low with optic cut. Supplied with dual MOLLE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting (Thumb Break option recommended). Mounting solutions using G-Code RTI system or Blade-Tech Tek-Lok can be done on a custom basis. Of course, actual adjustment range may be affected by the pistol size. If you want added versatility you can get the optional rigid belt loop is available. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The incredibly strong Kydex body withstands the rigors of being in the field. hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It is not recommended that you use this holster for you pistol without the light/laser attached for which is was molded. After you have made all of your adjustments make sure you use a medium thread locker on all your screws.$70.00
Molle Holster
The MOLLE Holster provides full slide protection while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is also available. Supplied with dual MALICE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting. Mounting solutions using G-Code RTI system, Safariland QLS and ELS, or Blade-Tech Tek-Lok can be done on a custom basis too. If you want added versatility you can get the optional rigid belt loop is available for $10. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The nearly indestructible Kydex body withstands the rigors of being in the field. Hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. New for 2015 are the adjustable tension screws. This will allow you to easily fine tune the retention of your holster. New for 2017 are the options for slide coverage. The original model featured a full sweat shield that went up slide and protected the rear sight from all sorts of battlefield abuses. Over the years we have many requests for lower custom cuts to allow for quicker muzzle presentation which we were happy to accommodate. You now have the option for lower clearances.$70.00
Hybrid Holster
Hybrid holsters have been very popular over the last decade. Providing the conforming nature of leather on the backside and the rugged form fitted Kydex on the outside blends the two spectrum’s of holster design. This is the Ares Tactical take featuring sturdy leather back and .080 Kydex. The Kydex Holster design allows you to have multiple shells and one leather backer. The opening is slightly flared to make holstering easier. The full wrap muzzle is standard. This protects the front sight from damage or become caught up on your clothes. As an added benefit it keeps your clothes clean from powder and oil from the slide and muzzle. Also, the wrapped muzzle reduces sharp edges and wear that can tear holes in your pants. Notice the rounded and treated edges of the leather. We take the extra time to do this because it makes carrying more comfortable and it looks good too. IWB Soft loops are a great option for those wanting something more secure that the traditional metal clips. The pull-the-dot snaps allow easy on and off. You can also choose tuckable injection molded belt clips. Cant angle can be fine tuned via front and back adjustment holes. Multiple shells are available for only $20. This allows you to use the same backer and reduce costs. Contact us for ordering. Don’t forget to check out our Ready to Ship page. This is where we list some overstock items (QS Quick Ship) as well as prototypes, blemished, and other non standard items (RS Ready Ship).$500.00