QS WeaponLight OWB Glock G17 TLR-1
$75.00
2 in stock
Category: Quick Ship
Tag: Holster, OWB, TLR1, weaponlight
Product Description
In Stock and ready to ship Glock G17/G22/G31 with Streamlight TLR-1 WeaponLight Holster.
Picture is just a representation of the style and not of the actual holster listed.
Features:
• Glock G17/G22/G31 (will fit most shorter versions such as the G19 and G23)
• Right Hand
• Black Kydex
• 1.75″ injection molded belt loops
Related Products
Sold Out!
QS Weaponlight OWB Glock G17 X300
In Stock and ready to ship Glock G17/G22/G31 with Surefire X300b Ultra (screw mount) WeaponLight Holster. Picture is just a representation of the style and not of the actual holster listed. Features: • Glock G17/G22/G31 (will fit most shorter versions such as the G19 and G23) • Right Hand • Black Kydex • 1.75″ injection molded belt loops$70.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Molle Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. The MOLLE Weaponlight Holster is similar to the standard MOLLE Holster. It provides full slide protection (when you select the Full Sweat Shield) while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is available such as the mid sweat shield, Low and low with optic cut. Supplied with dual MOLLE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting (Thumb Break option recommended). Mounting solutions using G-Code RTI system or Blade-Tech Tek-Lok can be done on a custom basis. Of course, actual adjustment range may be affected by the pistol size. If you want added versatility you can get the optional rigid belt loop is available. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The incredibly strong Kydex body withstands the rigors of being in the field. hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It is not recommended that you use this holster for you pistol without the light/laser attached for which is was molded. After you have made all of your adjustments make sure you use a medium thread locker on all your screws.$70.00
Molle Holster
The MOLLE Holster provides full slide protection while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is also available. Supplied with dual MALICE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting. Mounting solutions using G-Code RTI system, Safariland QLS and ELS, or Blade-Tech Tek-Lok can be done on a custom basis too. If you want added versatility you can get the optional rigid belt loop is available for $10. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The nearly indestructible Kydex body withstands the rigors of being in the field. Hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. New for 2015 are the adjustable tension screws. This will allow you to easily fine tune the retention of your holster. New for 2017 are the options for slide coverage. The original model featured a full sweat shield that went up slide and protected the rear sight from all sorts of battlefield abuses. Over the years we have many requests for lower custom cuts to allow for quicker muzzle presentation which we were happy to accommodate. You now have the option for lower clearances.$70.00
Hybrid Holster
Hybrid holsters have been very popular over the last decade. Providing the conforming nature of leather on the backside and the rugged form fitted Kydex on the outside blends the two spectrum’s of holster design. This is the Ares Tactical take featuring sturdy leather back and .080 Kydex. The Kydex Holster design allows you to have multiple shells and one leather backer. The opening is slightly flared to make holstering easier. The full wrap muzzle is standard. This protects the front sight from damage or become caught up on your clothes. As an added benefit it keeps your clothes clean from powder and oil from the slide and muzzle. Also, the wrapped muzzle reduces sharp edges and wear that can tear holes in your pants. Notice the rounded and treated edges of the leather. We take the extra time to do this because it makes carrying more comfortable and it looks good too. IWB Soft loops are a great option for those wanting something more secure that the traditional metal clips. The pull-the-dot snaps allow easy on and off. You can also choose tuckable injection molded belt clips. Cant angle can be fine tuned via front and back adjustment holes. Multiple shells are available for only $20. This allows you to use the same backer and reduce costs. Contact us for ordering. Don’t forget to check out our Ready to Ship page. This is where we list some overstock items (QS Quick Ship) as well as prototypes, blemished, and other non standard items (RS Ready Ship).$500.00
Competition Holster
Competition Holster for IDPA and USPSA Go to our new Competition Holster page. If you order on this page and not the new one linked above you will only get a Right Hand, Low Sweat Shield, and less options. The Competition Holster is perfect for IDPA and USPSA action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundreths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC member you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in it’s base position. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next IDPA competition. If you would like some other color scheme or a custom designed outer face then just Contact Us.$199.00