Sold Out!
Product Description
In stock and ready to ship! The Sig Sauer P229 no rail Standard Holster
Picture is just a representation of the style and not of the actual holster listed.
• Sig P229 no rail
• Right Hand
• Black Kydex
• 1.75″ injection molded belt loops
Related Products
SideKick Holster
Ares Tactical has made combination pistol and magazine IWB holsters for years by special order. There’s a pretty consistent pattern that several Kydex holster makers use. Our wasn’t that different in the basic design. We applied our critical eye on using the best materials and finishing, but essentially they looked and worked the same. The new SideKick holster is a first in its design. It takes up less belt room than the traditional style making it far more versatile in where you place it. Most pistol and mag holsters are limited to carrying in the front or AIWB (appendix Inside-the-belt). The Ares Tactical SideKick is small enough that some users will be able to place it anywhere including the strong side 3 o’clock position. The mag slot is built to handle full size magazines regardless of pistol size. Compact and subcompact magazines will fit deeper in the slot. User adjustable tension screws for both the pistol and magazine. This allows you to custom tune the draw effort needed for the pistol and magazine individually. Want even more versatility? Order the Ares Tactical SideKick Holster with UlitClips. These are a great upgrade and a most for those that need a secure IWB holster but don’t wear a belt. Mini FAQs: 1. Will the SideKick IWB holster work without a magazine? Yes, the SideKick is designed in a way that allows it to be used with or without a magazine placed in the slot. 2. Will this work with my Trijicon RMR (Burris Fast Fire, JP JPoint, etc.)? Generally, no. To keep the profile small we tuck the magazine slot close to the pistol. Some combinations of mini dot optics, mount, and compact magazines may work. 3. I see you make other holsters for my XDs 3.3 but not in the SideKick model. Why? The SideKick is made for many double stack pistols. Some double stack pistols and most single stack pistols do not work well with the intent of this design. 4. Is there an option for two or three magazines? No. Adding a second magazine substantially increases the relative size and severely restricts the versatility of the design. We recommend if you want to carry more magazine to get the Ares Tactical IWB Single Mag Carrier. 5. What are the optional deep seat clips? They are just like the regular clips but longer allowing up to one inch deeper concealment. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made.$120.00
Competition Holster
Competition Holster for IDPA, USPSA, & 3Gun The Competition Holster is perfect for IDPA, USPSA, and 3Gun action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundredths of a second this is the holster you want on your side. Dual retention screws, most models, lets you fine tune the draw effort and feel. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting the most stringent IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also makes it compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights that do no extend past the slide width. If yours is different, let us know and we can typically accommodate your needs. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC shooter you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the standard Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in its base position. Other custom belt attachment models are available such as the Safariland QLS & ELS. We can even custom mold a holster to your preferred belt attachment. Vistit the Belt Accessory Page or just contact us. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal for two tone competition holsters. Single layer holsters should choose flush. Two-tone dual layer competition holster can choose any option. The bevel is tapers the outer layer in most visible areas and adds a nice polished transition to the inner layer. This is our most popular option just beating out the Thin Blue Line (TBL) reveal. The Thin Blue Line reveal was originally made just for our Law Enforcement customers but we had such a demand we added it as a option for everyone, in every color nad kept the name. This is roughly an 1/8 inch set back on the outer layer letting more of the inner layer be visible. Bevel and TBL are not possible on single layer holsters, though the system will let you pay for it. We have added the option to choose your sweat shield coverage. Sometimes call a shirt guard, the sweat shield is the part of the holster between the rear of the slide and your body. Low cut is the shortest and typically ends just above the belt attachment point. The full is the tallest, covering most of the slide. Different slide profiles and grips will vary just how much is covered on the full option. If you are a high thumbs forward gripper any sweat shield will work. Low thumbs forward grippers tend to like the low shield coverage. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next competition. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made. If you would like some other color scheme or a custom designed outer face then just Contact Us.$80.00
QS Competition Holster P320 two tone
In stock and ready to ship! The Sig Sauer P320 Compact Competition Holster. Can be cut down to low or mid sweat shield. Just put it in the notes section. Picture is representative of the style and may not be the actual holster shipped. Features • Sig P320 Compact • Right Hand • Zombie Green Liner (aka Neon or Kawasaki green) • Black Carbon Fiber wrap • Full Sweat Shield • Beveled Edge$100.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Molle Holster
The MOLLE Holster provides full slide protection while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is also available. Supplied with dual MALICE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting. Mounting solutions using G-Code RTI system, Safariland QLS and ELS, or Blade-Tech Tek-Lok can be done on a custom basis too. If you want added versatility you can get the optional rigid belt loop is available for $10. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The nearly indestructible Kydex body withstands the rigors of being in the field. Hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. New for 2015 are the adjustable tension screws. This will allow you to easily fine tune the retention of your holster. New for 2017 are the options for slide coverage. The original model featured a full sweat shield that went up slide and protected the rear sight from all sorts of battlefield abuses. Over the years we have many requests for lower custom cuts to allow for quicker muzzle presentation which we were happy to accommodate. You now have the option for lower clearances.$70.00
Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. Modeled similarly to The Standard Holster, the Weapon light holster can be configured for belt carry or inside-the-waistband (IWB). Pictured is a Sig Sauer P226 9mm with a Streamlight TLR-1 weapon light in OD Green. The base model comes in black with 1.75″ belt loops. Other color and attachment methods are available. The body of the holster is constructed of .080 Kydex or, for some finishes, Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. Standard belt loops are made of very rigid .125 Kydex. Optional J-Hook or soft belt loops extends the versatility of this holster to be carried inside the waistband (IWB). Like the Standard Holster, the Weaponlight Holster has belt loop positions that allow four carry heights and different angles. The highest position of the belt loops allows the pistol to sit lowest on your belt. This will roughly place the trigger guard at the belt level. The belt loops can be dropped down to the next set of eyelets making for a slightly higher ride. Flipping the belt loops upside down with further raise the ride of the holster. Inverting the belt loops for a very high ride, as with any holster, should only be done with a stiff belt. As always , if you do not see your pistol, light, or bells and whistles listed below please contact us. We do a lot of custom work and strive to deliver just what you want. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$65.00