Sold Out!
Product Description
In stock and ready to ship! The Sig Sauer P229 no rail Standard Holster
Picture is just a representation of the style and not of the actual holster listed.
• Sig P229 no rail
• Right Hand
• Black Kydex
• 1.75″ injection molded belt loops
Related Products
RS G42 Double Duty holster 001
In stock and ready to ship! The Glock G42 Double Duty holster. Has a small scratch/smudge in the finish on the back side as seen in the pic. Tek Loc removed in photo to better show the blemish. Features • Glock G42 • Right Hand • Black Carbon Fiber • Mid Rise Sweat Guard • TekLok • 1.75″ IWB Belt ClipOriginal price was: $75.00.$65.00Current price is: $65.00.
SideKick Holster
Ares Tactical has made combination pistol and magazine IWB holsters for years by special order. There’s a pretty consistent pattern that several Kydex holster makers use. Our wasn’t that different in the basic design. We applied our critical eye on using the best materials and finishing, but essentially they looked and worked the same. The new SideKick holster is a first in its design. It takes up less belt room than the traditional style making it far more versatile in where you place it. Most pistol and mag holsters are limited to carrying in the front or AIWB (appendix Inside-the-belt). The Ares Tactical SideKick is small enough that some users will be able to place it anywhere including the strong side 3 o’clock position. The mag slot is built to handle full size magazines regardless of pistol size. Compact and subcompact magazines will fit deeper in the slot. User adjustable tension screws for both the pistol and magazine. This allows you to custom tune the draw effort needed for the pistol and magazine individually. Want even more versatility? Order the Ares Tactical SideKick Holster with UlitClips. These are a great upgrade and a most for those that need a secure IWB holster but don’t wear a belt. Mini FAQs: 1. Will the SideKick IWB holster work without a magazine? Yes, the SideKick is designed in a way that allows it to be used with or without a magazine placed in the slot. 2. Will this work with my Trijicon RMR (Burris Fast Fire, JP JPoint, etc.)? Generally, no. To keep the profile small we tuck the magazine slot close to the pistol. Some combinations of mini dot optics, mount, and compact magazines may work. 3. I see you make other holsters for my XDs 3.3 but not in the SideKick model. Why? The SideKick is made for many double stack pistols. Some double stack pistols and most single stack pistols do not work well with the intent of this design. 4. Is there an option for two or three magazines? No. Adding a second magazine substantially increases the relative size and severely restricts the versatility of the design. We recommend if you want to carry more magazine to get the Ares Tactical IWB Single Mag Carrier. 5. What are the optional deep seat clips? They are just like the regular clips but longer allowing up to one inch deeper concealment. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made.$120.00
Double Duty OWB IWB Holster
New! The Ares Tactical Double Duty Holster is two holsters in one. Key Features: • Rugged Kydex construction • Dual Tension screws (most models) for custom draw • Flared opening for easier holstering • Wrap Around Muzzle coverage protects the front sight • Made in the USA by Veterans Are you tire of having to compromise when buying a holster? Do you get the OWB or IWB or spend twice the money and get two? Is your box full of holsters to cover every carry method? Simplify life and get the Ares Tactical Double Duty Holster. This is available in a variety of colors and camouflage patterns. For OWB (Outside the waistband carry we use the BladeTeck Tek Lok. It is configurable for belts from 1.25 inches to 2.25 inches. You can also adjust the ride height and cant (forward and back). The back cant is popular with USPSA shooters and people looking for a crossdraw. The outside has a IWB overhook loop standard. The Ulticlip is popular available option for a minimal visual profile. It also allows you to carry the holster without wearing a belt or clipping inside your purse, pack, or double AR/AR mag pouch. The user can easily remove the side they don’t need at the time with a Philips head screwdriver. It take only seconds to swap back. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to chemicals and environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best balance of properties. The .060 thickness will do the job but feels flimsy to most people and is not nearly as strong for an OWB holster. Ares Tactical offers 21 different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It’s like getting two holsters in one. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$75.00
RS 1911 4.25″ Chopped Standard Holster
In stock and ready to ship! The 1911 Government Model Standard Holster chopped at 4.25″ Picture is just a representation of the style and is just one of several available. • 1911 4″ with Rail Gov’t model chopped, Fits most 4″, 4.25″ and 5″ models. • Right Hand • Black Kydex • 1.75″ injection molded belt loops$55.00
OWB to IWB Soft Loop Conversion Kit
Many OWB (Outside the Waistband) holsters including the Ares Tactical Standard Holster can easily be converted to IWB carry with this convenient conversion kit. Our soft loop kit includes all the hardware you need for most makers brand OWB holsters. The soft loop is an ultra strong synthetic laminate designed for years of use. It can be set for a variety of belt sizes up to 2 inches. The MilSpec Pull-the-Dot snaps ensure your loop stays snapped until you decide to remove it. Key Features: • 1.5″, 1.75″, and 2″ adjustment holes punched for convenient sizing to your belt • Laminated synthetic soft loop for years of all season use • MilSpec Pull-the-Dot snaps • Hardware included • Fits most OWB holsters with eyelets$20.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Molle Holster
The MOLLE Holster provides full slide protection while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is also available. Supplied with dual MALICE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting. Mounting solutions using G-Code RTI system, Safariland QLS and ELS, or Blade-Tech Tek-Lok can be done on a custom basis too. If you want added versatility you can get the optional rigid belt loop is available for $10. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The nearly indestructible Kydex body withstands the rigors of being in the field. Hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. New for 2015 are the adjustable tension screws. This will allow you to easily fine tune the retention of your holster. New for 2017 are the options for slide coverage. The original model featured a full sweat shield that went up slide and protected the rear sight from all sorts of battlefield abuses. Over the years we have many requests for lower custom cuts to allow for quicker muzzle presentation which we were happy to accommodate. You now have the option for lower clearances.$70.00
Competition Holster
Competition Holster for IDPA and USPSA Go to our new Competition Holster page. If you order on this page and not the new one linked above you will only get a Right Hand, Low Sweat Shield, and less options. The Competition Holster is perfect for IDPA and USPSA action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundreths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC member you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in it’s base position. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next IDPA competition. If you would like some other color scheme or a custom designed outer face then just Contact Us.$199.00