Product Description
Designed for comfortable all day carry, the Paddle Holster is far easier to put on and remove than a belt holster. Low cut sight channel aids in quickly clearing holster in getting on target. Flared top makes one-handed reholstering easy. The recurved wings on the paddle back help aid retention.
Additional information
| RIght or Left | Lefty, Righty |
|---|
Related Products
Belt Drop Holster
The Belt Drop Holster is the happy place(ment) between having a belt holster and thigh holster. The mid drop design fits belts up to 2.25″ with an adjustable belt sizer. Holsters come shipped in the neutral vertical position but can be easily adjusted for forward or back cant angle with a standard Philips screwdriver. Retention can adjusted via the 2-3 tension screws. Additional levels of security can be had with the Thumb Break option. This rubberized laminated webbing secures across the rear of the slide and is easy to manipulate under stress. This strap is also removable. The single thigh strap helps stabilize the dropped holster. The leg strap features rubber anti-slip strips to minimize shifting while active. There is also an elastic webbing for additional comfort. This strap is also removable. All holsters come mounted directly to the belt drop platform. We do offer a variety quick-release interchangeable hardware that allow your to swap holster quickly or the move your holster from one platform to another easily. Some of the more popular are the Blade-Tech TMMS, Safariland QLS, and G-Code RTI. Essentially they all serve the same function but are not interoperable between brands. One side mounts to the holster (Insert/fork/hanger) and the other mounts to platform (thigh panel/ belt slide, molle adapter) and this is usually called the plate. Is one any better than another? That’s a personal preference as they all have their own following. TMMS puts it off the body the least, RTI is the easiest to swap out. QLS is the most ubiquitous. There is some adjustment in the holster placement in the Belt Drop dependent if you have a light selected. This can be 3/4″ to 1.5″ Additional holsters can be ordered by choosing our Molle Holster and Molle Weaponlight Holster. We try to provide the highest level of flexibility and cost savings. Just let us know at the time of order so we can pre-drill the correct hole spacing at no extra charge.$99.00
Range Holster
The Range Holster is a great solution for someone wanting a holster that is both versatile in application and easy to use. This taco holster style is formed from a single piece of thermoformed Kydex. This allows a small footprint on your belt freeing up space for other items you need to carry. The Range Holster is suitable for a causal trip to the range or for use in competitive shooting sports like IDPA, USPSA, and 3gun. The secure locking TekLok belt attachment can be sized up to 2.25″ that covers everything from dress belts to tactical belts and most duty belts. As with many of our holsters you can have this made to fit your weaponlight. Ares Tactical has over 40 different lights and lasers on hand covering all the major lights like Surefire, Streamlight, Modlite, OLight, Viridian, and Crimson Trace. Ares Tactical is a veteran owned and operated small business. Our products are made in America, by Americans, working the American dream. Thank you for your business.$80.00
Thigh Holster
Whether you call it a Thigh Holster, Leg Holster, or Drop Leg Holster they all free up belt space and provide extra clearance around body armor to access your pistol. It is also easier to draw from your support hand. The Ares Tactical Thigh Holster is highly versatile. It is adjustable for ride height, including being able to remove the top strap. Both let straps feature rubberized strips that help prevent twisting or unwanted movement. Dual tension screw allow you to adjust the force needed to draw. All holsters come mounted directly to the thigh platform. We do offer a variety quick-release interchangeable hardware that allow your to swap holster quickly or the move your holster from one platform to another easily. Some of the more popular are the Blade-Tech TMMS, Safariland QLS, and G-Code RTI. Essentially they all serve the same function but are not interoperable between brands. One side mounts to the holster (Insert/fork/hanger) and the other mounts to platform (thigh panel/ belt slide, molle adapter) and this is usually called the plate. Is one any better than another? That’s a personal preference as they all have their own following. TMMS puts it off the body the least, RTI is the easiest to swap out. QLS is the most ubiquitous. Additional holsters can be ordered by choosing our Molle Holster and Molle Weaponlight Holster. We try to provide the highest level of flexibility and cost savings. Just let us know at the time of order so we can pre-drill the correct hole spacing at no extra charge. As with all our Kydex Holsters, the Thigh Holster is Made in the USA by veterans using parts and materials made in the US. Update 12 January 2021: We have brought in some Blade-Tech thigh panels to offer more colors and hopefully have a more consistent supply on hand. These feature a semi-rigid polymer platform with dual leg adjustments and an adjustable drop hanger with a quick release side buckle. Update 1 February 2018: Our supplier has discontinued the Cordura thigh panels in a style we use. Very limited stock or old stock is available. Thigh panel colors we have on hand are available in the drop down menu. Currently only Coyote Brown (code 498) Cordura is in stock.$130.00
RS 1911 4.25″ Chopped Standard Holster
In stock and ready to ship! The 1911 Government Model Standard Holster chopped at 4.25″ Picture is just a representation of the style and is just one of several available. • 1911 4″ with Rail Gov’t model chopped, Fits most 4″, 4.25″ and 5″ models. • Right Hand • Black Kydex • 1.75″ injection molded belt loops$55.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Competition Holster
Competition Holster for IDPA and USPSA Go to our new Competition Holster page. If you order on this page and not the new one linked above you will only get a Right Hand, Low Sweat Shield, and less options. The Competition Holster is perfect for IDPA and USPSA action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundreths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC member you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in it’s base position. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next IDPA competition. If you would like some other color scheme or a custom designed outer face then just Contact Us.$199.00
Bodyguard IWB V2
New! The Bodyguard V2 Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The Bodyguard V2 is not the next generation holster but just a different attachment style that many have asked to have made. The over the belt clip is sturdy and and adjustable for straight carry, FBI forward cant and reverse cant popular with some AIWB and crossdraw carriers. The Bodyguard V2 Holster also features dual adjustable tension screws. This will let you fine tune the amount of force needed to draw the holster to fit your needs. The “chopped” version is a straight cut across the muzzle that allows you to place a longer barrel version or threaded barrel. The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to reholster. The extra stiffness over the .060 is something IDPA competitors will appreciate. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. We now offer this as a option. The small bottle will do about ten holsters.$55.00