Product Description
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge.The Enhanced Trigger Guard features 1.75″ belt clip allowing easy concealed carry. The high impact polymer clip is removable and reverseable. The clip can be adjusted for a slight forward or reverse cant.
If you want an even smaller version check out the Micro Trigger Guard.
Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop.
The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.
Related Products
Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
Micro Trigger Guard
The smallest and lightest protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you are looking for a compact trigger guard with an IWB belt clip check out the Enhanced Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the Micro Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
Thigh Holster
Whether you call it a Thigh Holster, Leg Holster, or Drop Leg Holster they all free up belt space and provide extra clearance around body armor to access your pistol. It is also easier to draw from your support hand. The Ares Tactical Thigh Holster is highly versatile. It is adjustable for ride height, including being able to remove the top strap. Both let straps feature rubberized strips that help prevent twisting or unwanted movement. Dual tension screw allow you to adjust the force needed to draw. All holsters come mounted directly to the thigh platform. We do offer a variety quick-release interchangeable hardware that allow your to swap holster quickly or the move your holster from one platform to another easily. Some of the more popular are the Blade-Tech TMMS, Safariland QLS, and G-Code RTI. Essentially they all serve the same function but are not interoperable between brands. One side mounts to the holster (Insert/fork/hanger) and the other mounts to platform (thigh panel/ belt slide, molle adapter) and this is usually called the plate. Is one any better than another? That’s a personal preference as they all have their own following. TMMS puts it off the body the least, RTI is the easiest to swap out. QLS is the most ubiquitous. Additional holsters can be ordered by choosing our Molle Holster and Molle Weaponlight Holster. We try to provide the highest level of flexibility and cost savings. Just let us know at the time of order so we can pre-drill the correct hole spacing at no extra charge. As with all our Kydex Holsters, the Thigh Holster is Made in the USA by veterans using parts and materials made in the US. Update 12 January 2021: We have brought in some Blade-Tech thigh panels to offer more colors and hopefully have a more consistent supply on hand. These feature a semi-rigid polymer platform with dual leg adjustments and an adjustable drop hanger with a quick release side buckle. Update 1 February 2018: Our supplier has discontinued the Cordura thigh panels in a style we use. Very limited stock or old stock is available. Thigh panel colors we have on hand are available in the drop down menu. Currently only Coyote Brown (code 498) Cordura is in stock.$130.00
Competition Holster
Competition Holster for IDPA, USPSA, & 3Gun The Competition Holster is perfect for IDPA, USPSA, and 3Gun action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundredths of a second this is the holster you want on your side. Dual retention screws, most models, lets you fine tune the draw effort and feel. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting the most stringent IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also makes it compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights that do no extend past the slide width. If yours is different, let us know and we can typically accommodate your needs. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC shooter you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the standard Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in its base position. Other custom belt attachment models are available such as the Safariland QLS & ELS. We can even custom mold a holster to your preferred belt attachment. Vistit the Belt Accessory Page or just contact us. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal for two tone competition holsters. Single layer holsters should choose flush. Two-tone dual layer competition holster can choose any option. The bevel is tapers the outer layer in most visible areas and adds a nice polished transition to the inner layer. This is our most popular option just beating out the Thin Blue Line (TBL) reveal. The Thin Blue Line reveal was originally made just for our Law Enforcement customers but we had such a demand we added it as a option for everyone, in every color nad kept the name. This is roughly an 1/8 inch set back on the outer layer letting more of the inner layer be visible. Bevel and TBL are not possible on single layer holsters, though the system will let you pay for it. We have added the option to choose your sweat shield coverage. Sometimes call a shirt guard, the sweat shield is the part of the holster between the rear of the slide and your body. Low cut is the shortest and typically ends just above the belt attachment point. The full is the tallest, covering most of the slide. Different slide profiles and grips will vary just how much is covered on the full option. If you are a high thumbs forward gripper any sweat shield will work. Low thumbs forward grippers tend to like the low shield coverage. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next competition. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made. If you would like some other color scheme or a custom designed outer face then just Contact Us.$80.00
Double Duty OWB IWB Holster
New! The Ares Tactical Double Duty Holster is two holsters in one. Key Features: • Rugged Kydex construction • Dual Tension screws (most models) for custom draw • Flared opening for easier holstering • Wrap Around Muzzle coverage protects the front sight • Made in the USA by Veterans Are you tire of having to compromise when buying a holster? Do you get the OWB or IWB or spend twice the money and get two? Is your box full of holsters to cover every carry method? Simplify life and get the Ares Tactical Double Duty Holster. This is available in a variety of colors and camouflage patterns. For OWB (Outside the waistband carry we use the BladeTeck Tek Lok. It is configurable for belts from 1.25 inches to 2.25 inches. You can also adjust the ride height and cant (forward and back). The back cant is popular with USPSA shooters and people looking for a crossdraw. The outside has a IWB overhook loop standard. The Ulticlip is popular available option for a minimal visual profile. It also allows you to carry the holster without wearing a belt or clipping inside your purse, pack, or double AR/AR mag pouch. The user can easily remove the side they don’t need at the time with a Philips head screwdriver. It take only seconds to swap back. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to chemicals and environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best balance of properties. The .060 thickness will do the job but feels flimsy to most people and is not nearly as strong for an OWB holster. Ares Tactical offers 21 different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It’s like getting two holsters in one. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$75.00
Shoulder Holster
From Miami Vice to Dirty Harry or a Yippee Ki-Yay NYC police detective, the shoulder holster has played an iconic role in movies and television. The Ares Tactical Shoulder Holster is an updated lightweight version using Kydex. This is a significant weight saving over older traditional leather versions and fit better than nylon models. We offer both horizontal and vertical carry holsters. Both models features an optional removable belt tie down. Each holster has a tension adjustment so you can adjust the retention to meet your desire. You can add a double magazine carrier on the other side. This really helps balance the rig and is a great way to have extra magazines at the ready. The shoulder harness is x-rig design that distributes weight well and helps to keep you holster and ammo where you place them. On the off side you can add a double magazine pouch or a combination magazine and flashlight pouch. Besides having those extra items you should be carrying easily at hand is provides great balance if you are not tying your holster into your belt. All shoulder holsters require greater care and training as compared to strong side belt holsters such as our Standard Holster. The disadvantages are it is very easy to sweep (muzzle) yourself and others on the draw. Also, it can be troublesome for people back problems. There are also some significant advantages wearing a shoulder holster. Among the advantages of a shoulder holster is access while seated. This is particularly true when you are strapped into your car seat. You can also stage your hand on the weapon under your jacket and still be concealed and inconspicuous. The shoulder rig is a great way to have your pistol and magazines at the ready for those bumps in the night. Many people find the shoulder holster in more convenient to draw with either hand. Tie down straps simple screw onto your kydex holster or mag holder and snap around your belt. We recommend at least one when choosing the vertical shoulder holster configuration. Don’t forget to pick up some threadlocker to secure all your screws after making the adjustments. We now offer A La Carte Shoulder Holster parts. These can be used with our harness or many other brands. Pistol Carriers: Magazine and Combo Mag & Light Pouches: Shoulder Harnesses Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made.$135.00
Molle Holster
The MOLLE Holster provides full slide protection while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is also available. Supplied with dual MALICE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting. Mounting solutions using G-Code RTI system, Safariland QLS and ELS, or Blade-Tech Tek-Lok can be done on a custom basis too. If you want added versatility you can get the optional rigid belt loop is available for $10. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The nearly indestructible Kydex body withstands the rigors of being in the field. Hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. New for 2015 are the adjustable tension screws. This will allow you to easily fine tune the retention of your holster. New for 2017 are the options for slide coverage. The original model featured a full sweat shield that went up slide and protected the rear sight from all sorts of battlefield abuses. Over the years we have many requests for lower custom cuts to allow for quicker muzzle presentation which we were happy to accommodate. You now have the option for lower clearances.$70.00