Product Description
The Competition Mag Pouch GM Edition is perfect for action shooting matches, range use, or everyday carry. The perfect companion to our Competition Holster or use on it’s own. If you measure time by the hundereths of a second this is the Mag Pouch you want on your side.
This special GM Edition was specially designed with the input of top level competitors looking to squeeze out every bit of advantage possible. A flair has been added to our standard speed chute to further expand the opening. This combined with the FatBack feature makes stowing magazines on the clock or in practice quick and effortless.
Dual retention screws lets you fine tune the draw effort. The contact area with the magazine has been minimized for the quickest release possible.
The low cut front is a popular feature allowing your finger to index on the front of the magazine.
The belt clip is available in 1.5″ and 1.75″ (standard).
The Speed Chute flared opening is added for easier inserting. This allows the shooter to return the magazine easily. A great feature especially appreciated by IDPA shooters.
Order the single color or two-tone model. The single color uses only the Base Color Option. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal.
The FATBACK started with a conversation that began with, “Hey Matt, I’m kinda fat…” about our standard double mag pouch. He wanted a sweat guard that came up partially on the back side that made inserting magazines less painful if his Dunlap hung over the pouch opening. In playing with this idea we found that in combination with our speed chute flaring that inserting magazines became quick and effortless. That saves you time on the practice range. Also, we have seen several higher level matches start the stage off with magazines on the table and require you to stow them. This feature is great for that and is standard on the GM edition and an option on our regular competition mag pouches.
If you would like some other color scheme or a custom designed outer face then just Contact Us.
Additional information
| Pistol Magazine | |
|---|---|
| RIght or Left | Lefty, Righty |
| Belt Size |
You may also like…
Competition Holster
Competition Holster for IDPA and USPSA Go to our new Competition Holster page. If you order on this page and not the new one linked above you will only get a Right Hand, Low Sweat Shield, and less options. The Competition Holster is perfect for IDPA and USPSA action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundreths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC member you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in it’s base position. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next IDPA competition. If you would like some other color scheme or a custom designed outer face then just Contact Us.$199.00
Related Products
LIC Rig
The LIC Rig is a great choice for those operating in one of the many Low Intensity Conflict (LIC) areas around the world. It provides the user with an easy way to conceal several AR15 or pistol magazines providing a full combat load. All of this in a convenient concealed carry solution. Escalating tensions domestically call for you to up your capabilities. The LIC Rig provides a compact and lightweight AR mag carrier that you can easily pack in a briefcase, backpack, or under your seat until needed. Donning this shoulder rig only takes seconds. The modular design allows you to be flexible in an ever changing environment. Additional panels are available for pistol mags, combination AR/pistol, and utility pocket for things like pocket med kits. You can also replace one side with a pistol holster from our Shoulder Holster parts. The X-Harness shoulder strap design provides good weight distribution as well as a carry adjustment. Adjustments to the mil-spec one inch webbing are easy to make. Swapping panels out only takes a minute. The original concept of the LIC Rig came from a customer who wanted something like what was used in the 1995 movie Heat. The bank robbery scene featured a vest that held six AR mags under a suit coat. While this works well if you are wearing a three piece suit it is not low profile in a lot of other scenarios. This shoulder harness combines the capacity of the original design with a solution that is easier to conceal. A note on sizing: Model is 6’2″ (187cm) and wears a Large/42L. Concealing 30rd AR magazines on small frame persons or improperly fitted rig can lead to printing . Take a few minutes and hold a mag on your side and check to see if this will be a good fit for you before ordering. Returns are subject to restocking fees$100.00
Double Shell Holder
The Double Shell Holder is designed to get you quick access to two 12ga shot shells. The single centralized tension screw allows the user to fine tune the grip on your shells. This can give you the exact hold you need for vigorous combative activities or more casual field and range usage. The Double Shell Holder uses Blade Tech Tek-Lok bet attachment. This highly versatile mount allows you to properly size it for belts up to 2.25″ wide. This is a vast improvement in stability over other designs that do not have adjustments for different belt widths. The width of the TekLok also provides stability left and right over skinny clip type holders. The holder is designed to allow easy access to the shells weather you choose to hinged Tek Lok on the top or bottom. While having the hinge of the clamshell style Tek Lok is most common some prefer the have the hinge on the bottom so that the locking mechanism faces up. Some find this easier to put on and take off the belt. Using an optional Molle Clip or Molle-Lok will allow you to take the Double Shell Holder and mount it to your tactical vest, plate carrier, or battle belt. The body of the shot shell holder is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties in terms of durability and weight. The .060 thickness will do the job but feels flimsy to most people. The picture above shows standard 2 3/4″ shotgun shells in the holder. You could use shorter shells or the longer 3″ and 3 1/2″ length rounds. If you have any questions just reach out to us using the contact information at the bottom of the page.$30.00
Single Mag Pouch Clip On
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each Single Mag carrier features an adjustable tension screw so you can set it to your preference. The polymer belt clip allows you to easily put on your mag pouches without having to take your belt off. When ordering you can specify righty or lefty. The Righty is worn on the left side OWB with the bullets forward. If you wear the Righty on the right side the bullets will face backwards and the tension screws forward. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right? Can I use this IWB? Yes, these can be used inside the waistband but right and left hand build is determined by the outside the waistband designation. So, if you want to carry on your left side inside your pants order the LEFTY. As always, if you have a question please Contact Us.$30.00
PCC Mag Pouch
Tired of those big sticks not working well in your regular mag carrier? Is your PCC game suffering because your reloads are not as efficient as they could be? Ares Tactical’s PCC mag pouch is just what you have been looking for. This is a evolution of our well regarded Competition Mag Pouch. No longer will you have to worry if your magazines will stay in place on a stage with movement. No more 33 round mags be jacked up into your armpits. These are designed to fully encompass a full size magazine such as the Glock G17. When you use extended mags such as the MagPul Pmag21 and 33 round happy stick will allow easy grasping of the magazine. As of June 2017, we are only offering these for the Glock type magazines. Other magazine types will be added as demand dictates. Please feel free to contact us if you have a different magazine. UPDATE: August 2017, we have now added Beretta M9/Model 92 and UZI 9mm magazines to the available options. We will continue to add more as you all request for our PCC Magazine carriers. Two different mounting positions on your belt allow normal belt height or drop position allowing 1.5″ lower seating relative to the top of your belt. Three tension adjustment points go from gorilla grip to rattling bucket. Multiple carry heights are possible with the standard Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. Ares Tactical stock dozens of different colors, camo patterns, and textures such are carbon fiber. When ordering a single layer carrier use the Base color option. If you want a dual layer Kydex pouch the base will be inside and wrap will be the outer color. Fatback is not available in the PCC Mag Pouch. Though, the current system will let you order it. Don’t forget to order your matching Competition Pistol Holster here. You might as well look good while you are winning. Enjoy the best for your Pistol Caliber Carbine whether your compete in USPSA, IDPA, 2 gun, 3 gun, or outlaw matches. You can always check out lead time on the FAQ Tab.$45.00
AR Mag Pouch
The Single AR Mag Pouch is a convenient way to carry a spare rifle magazine on your belt. It is available for the AR15 and SR25 magazines and fit most magazines. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each pouch features Speed Chute. This flared opening allows easier insertion of magazines. This is great to have if you do a lot of training or just want to cut down on the frustration of perfectly lining up your magazine to fit in a mag pouch. There are some of the adjustment for ride height and cant by changing the position of the belt loops. Don’t forget you we also offer optional inside the waistband (IWB) J-Hooks or soft loops for deeper concealment solutions. When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets facing rearward. If you wear the Righty on the right side the bullets will face forwards. The Lefty, when worn on the right side, will have the bullets facing backwards. Easy enough, right? These rifle magazine pouches are based off MagPul magazines but work for most other rifle magazines too. As such, PMags will have more positive snap fit like on a regular pistol holster versus the friction fit on most magazine pouches. We offer dozens of different Kydex colors, camos, and patterns. If you don’t see what you want just contact us and we can probably get what you want. When ordering, your pouch will come with one set of belt loops that you choose. The Extras and Spares are in addition to what you choose at the top. There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made. As always, if you have a question please Contact Us.$35.00
Single IWB Mag Pouch
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each Single IWB Mag carrier features an adjustable tension screw so you can set it to your preference. If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch. When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right? There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish. As always, if you have a question please Contact Us.$30.00
Competition Mag Pouch
The Competition Mag Pouch is perfect for action shooting matches, range use, or everyday carry. The perfect companion to our Competition Holster or use on it’s own. If you measure time by the hundereths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. The low cut front is a popular feature allowing your finger to index on the front of the magazine. The Tek-Loc belt adapter fits belts 1.25 to 2.25 inches. A standard 1.75” belt allows three carry height adjustments that can be locked in. The Speed Chute flared opening is added for easier inserting. This allows the shooter to return the magazine easily. A great feature especially appreciated by IDPA shooters. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. FATBACK upgrade started with a conversation that began with, “Hey Matt, I’m kinda fat…” about our standard double mag pouch. He wanted a sweat guard that came up partially on the back side that made inserting magazines less painful if his Dunlap hung over the pouch opening. In playing with this idea we found that in combination with our speed chute flaring that inserting magazines became quick and effortless. That saves you time on the practice range. Also, we have seen several higher level matches start the stage off with magazines on the table and require you to stow them. This feature is great for that. If you would like some other color scheme or a custom designed outer face then just Contact Us.$40.00