Product Description
This page is for ordering accessory attachments to your Competition Holsters, Competition Mag Pouches and Molle Holsters.
You may also like…
Molle Holster
The MOLLE Holster provides full slide protection while minimizing the real estate used on your belt or vest. The additional slide coverage helps protect your rear sight and firearm. Custom lower profile slide coverage is also available. Supplied with dual MALICE Clips, the MOLLE Holster mounts easily and securely. There are multiple vertical height adjustments as well as horizontal mounting. Mounting solutions using G-Code RTI system, Safariland QLS and ELS, or Blade-Tech Tek-Lok can be done on a custom basis too. If you want added versatility you can get the optional rigid belt loop is available for $10. They are available in 1.5, 1.75, and 2″ and come with all the necessary hardware. The nearly indestructible Kydex body withstands the rigors of being in the field. Hot, cold, dry or wet is will will not matter. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. An added benefit is it allows plenty of clearance for drainage. New for 2015 are the adjustable tension screws. This will allow you to easily fine tune the retention of your holster. New for 2017 are the options for slide coverage. The original model featured a full sweat shield that went up slide and protected the rear sight from all sorts of battlefield abuses. Over the years we have many requests for lower custom cuts to allow for quicker muzzle presentation which we were happy to accommodate. You now have the option for lower clearances.$70.00
Competition Mag Pouch
The Competition Mag Pouch is perfect for action shooting matches, range use, or everyday carry. The perfect companion to our Competition Holster or use on it’s own. If you measure time by the hundereths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. The low cut front is a popular feature allowing your finger to index on the front of the magazine. The Tek-Loc belt adapter fits belts 1.25 to 2.25 inches. A standard 1.75” belt allows three carry height adjustments that can be locked in. The Speed Chute flared opening is added for easier inserting. This allows the shooter to return the magazine easily. A great feature especially appreciated by IDPA shooters. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. FATBACK upgrade started with a conversation that began with, “Hey Matt, I’m kinda fat…” about our standard double mag pouch. He wanted a sweat guard that came up partially on the back side that made inserting magazines less painful if his Dunlap hung over the pouch opening. In playing with this idea we found that in combination with our speed chute flaring that inserting magazines became quick and effortless. That saves you time on the practice range. Also, we have seen several higher level matches start the stage off with magazines on the table and require you to stow them. This feature is great for that. If you would like some other color scheme or a custom designed outer face then just Contact Us.$40.00
Competition Holster
Competition Holster for IDPA and USPSA Go to our new Competition Holster page. If you order on this page and not the new one linked above you will only get a Right Hand, Low Sweat Shield, and less options. The Competition Holster is perfect for IDPA and USPSA action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundreths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC member you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in it’s base position. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next IDPA competition. If you would like some other color scheme or a custom designed outer face then just Contact Us.$199.00
Related Products
TMMS Kit
TMMS (Tactical Modular Mount System) Details TMMS (Tactical Modular Mount System) offers a quick and toolless method for mounting and removing your gear across multiple mounting platforms – belt, MOLLE vest, thigh rig, etc. Quickly transfer gear from the belt to the vest to the leg or anywhere else you can stick a TMMS receiver plate. Connect the TMMS insert plate directly to the existing mounting holes on your Blade-Tech gear. Connect a corresponding receiver plate to the Tek-Lok, Molle-Lok, Thigh Rig, or many of our other attachments. Additionally, the TMMS system can be canted rearward, neutral, or forward on the receiver plate or the insert plate. With this modular platform, you can change your carry method without the need to purchase additional holsters or modify your existing TMMS equipped holsters. Features Rearrange Gear Quickly and Easily Quickly move gear from the belt to the vest or anywhere else you can stick a TMMS receiver plate without removing any apparel. Double Lock Slide plates together until an audible click is heard and then engage the integrated secondary locking system. Compatibility Mount TMMS Receiver Plate to any of our attachments and the insert plate to our Thigh, Molle, or Competition Holsters. Flexibility Can be quickly attached to Tek-Lok, Molle-Lok, Duty Drop and Offset, Thigh Rig, and several other attachments. Precision Molded Design Produced with high strength, heat resistant polymer in the USA. Precision molded for a superior fit.$29.99
TQ Holder
More and more alert people are wanting to carry a tourniquet following more that a decade data from the US military use in combat. Tourniquets (TQ) saves lives. The old days of the ABC (airway, breathing, circulation) medical care has been replaced with MARCH (massive bleeding, airway, respiration and breathing, circulation, hypothermia). The Ares Tactical TQ holder offers rapid deployment of this valuable life saving device. Initially offered for the NAR CAT Tourniquet (Combat Action Tourniquet) with other models to follow later. You can attach the tourniquet carrier with a variety of methods. You may like the simple belt clip for concealed carry or the Teklok popular with many competition and range shooters. MOLLE Malice clips for your plate carrier or battle belt are also available. The body of the holder is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your carrier. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. Ares Tactical offers 30+ different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job.$35.00
OWB Closed Belt Loops
These are the standard injection molded closed belt loops you find used by many holster makers. Sold as a set of two (2) Below are the hole spacing(s) for each belt size. All will work with our Standard Holster, OWB Single Mag Pouch, OWB Double Mag Pouch, and OWB Mag/Light Combo Pouch. 1.5″ closed belt loop: 1.75″, 1″ spacing 1.75″ closed belt loop: 2″ spacing 2.0″ closed belt loop: 2″, 1.75″, & 1/2″$8.00
Kydex Wallet
Kydex Wallets are a great way to hold some cash, credit cards, and business cards. We’ve been making these as a special order item since 2014. Now you can order with ease. Our Kydex Wallets. or sometimes called business card holders, now come in three sizes. The original kydex wallet is the small size. This holds 17-20 business cards at about 1/2″ thick. The medium holds 22-26 cards. The large holds 26-31 business cards at about 2/3″ thick.$20.00
UltiClip
The UltiClip is a innovative holster attachment that allows secure retention without the use of a belt. Product Description 100% American Made Military Grade Black Oxide Finish Heat Treated to RC 42-49 C-1075 Spring Steel Wax Treated Steel – aids in smooth operation & rust inhibitor Minimum Profile, Maximum Concealment Over 10X The Retention Compared To Most Holster Clips Dual Mounting Bracket Size: 3.5″ x 7/8″ Weight: .78 oz.$12.99
Malice Clips
MALICE CLIPS® are injection molded, heavy duty, reusable connecting clips that are designed to attach modular pouches to MOLLE/PALS style equipment. MALICE CLIPS® are not affected by heat or cold, and will never corrode or lose their subdued finish. Once properly closed, the clip will not open until it is disengaged by the user using a flat tipped object such as a knife or screwdriver. We are currently shipping the new Lite version that are stronger and lighter than the original. We currently only stock the short straps. These are roughly 3 inches closed. If you need long ones Contact Us.$2.50
