Product Description
New! The Bodyguard V2 Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The Bodyguard V2 is not the next generation holster but just a different attachment style that many have asked to have made. The over the belt clip is sturdy and and adjustable for straight carry, FBI forward cant and reverse cant popular with some AIWB and crossdraw carriers.
The Bodyguard V2 Holster also features dual adjustable tension screws. This will let you fine tune the amount of force needed to draw the holster to fit your needs.
The “chopped” version is a straight cut across the muzzle that allows you to place a longer barrel version or threaded barrel.
The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to reholster. The extra stiffness over the .060 is something IDPA competitors will appreciate.
This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference.
As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. We now offer this as a option. The small bottle will do about ten holsters.
Additional information
| RIght or Left | Lefty, Righty |
|---|
Related Products
Range Holster
The Range Holster is a great solution for someone wanting a holster that is both versatile in application and easy to use. This taco holster style is formed from a single piece of thermoformed Kydex. This allows a small footprint on your belt freeing up space for other items you need to carry. The Range Holster is suitable for a causal trip to the range or for use in competitive shooting sports like IDPA, USPSA, and 3gun. The secure locking TekLok belt attachment can be sized up to 2.25″ that covers everything from dress belts to tactical belts and most duty belts. As with many of our holsters you can have this made to fit your weaponlight. Ares Tactical has over 40 different lights and lasers on hand covering all the major lights like Surefire, Streamlight, Modlite, OLight, Viridian, and Crimson Trace. Ares Tactical is a veteran owned and operated small business. Our products are made in America, by Americans, working the American dream. Thank you for your business.$80.00
Thigh Holster
Whether you call it a Thigh Holster, Leg Holster, or Drop Leg Holster they all free up belt space and provide extra clearance around body armor to access your pistol. It is also easier to draw from your support hand. The Ares Tactical Thigh Holster is highly versatile. It is adjustable for ride height, including being able to remove the top strap. Both let straps feature rubberized strips that help prevent twisting or unwanted movement. Dual tension screw allow you to adjust the force needed to draw. All holsters come mounted directly to the thigh platform. We do offer a variety quick-release interchangeable hardware that allow your to swap holster quickly or the move your holster from one platform to another easily. Some of the more popular are the Blade-Tech TMMS, Safariland QLS, and G-Code RTI. Essentially they all serve the same function but are not interoperable between brands. One side mounts to the holster (Insert/fork/hanger) and the other mounts to platform (thigh panel/ belt slide, molle adapter) and this is usually called the plate. Is one any better than another? That’s a personal preference as they all have their own following. TMMS puts it off the body the least, RTI is the easiest to swap out. QLS is the most ubiquitous. Additional holsters can be ordered by choosing our Molle Holster and Molle Weaponlight Holster. We try to provide the highest level of flexibility and cost savings. Just let us know at the time of order so we can pre-drill the correct hole spacing at no extra charge. As with all our Kydex Holsters, the Thigh Holster is Made in the USA by veterans using parts and materials made in the US. Update 12 January 2021: We have brought in some Blade-Tech thigh panels to offer more colors and hopefully have a more consistent supply on hand. These feature a semi-rigid polymer platform with dual leg adjustments and an adjustable drop hanger with a quick release side buckle. Update 1 February 2018: Our supplier has discontinued the Cordura thigh panels in a style we use. Very limited stock or old stock is available. Thigh panel colors we have on hand are available in the drop down menu. Currently only Coyote Brown (code 498) Cordura is in stock.$130.00
Competition Holster
Competition Holster for IDPA, USPSA, & 3Gun The Competition Holster is perfect for IDPA, USPSA, and 3Gun action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundredths of a second this is the holster you want on your side. Dual retention screws, most models, lets you fine tune the draw effort and feel. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting the most stringent IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also makes it compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights that do no extend past the slide width. If yours is different, let us know and we can typically accommodate your needs. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC shooter you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the standard Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in its base position. Other custom belt attachment models are available such as the Safariland QLS & ELS. We can even custom mold a holster to your preferred belt attachment. Vistit the Belt Accessory Page or just contact us. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal for two tone competition holsters. Single layer holsters should choose flush. Two-tone dual layer competition holster can choose any option. The bevel is tapers the outer layer in most visible areas and adds a nice polished transition to the inner layer. This is our most popular option just beating out the Thin Blue Line (TBL) reveal. The Thin Blue Line reveal was originally made just for our Law Enforcement customers but we had such a demand we added it as a option for everyone, in every color nad kept the name. This is roughly an 1/8 inch set back on the outer layer letting more of the inner layer be visible. Bevel and TBL are not possible on single layer holsters, though the system will let you pay for it. We have added the option to choose your sweat shield coverage. Sometimes call a shirt guard, the sweat shield is the part of the holster between the rear of the slide and your body. Low cut is the shortest and typically ends just above the belt attachment point. The full is the tallest, covering most of the slide. Different slide profiles and grips will vary just how much is covered on the full option. If you are a high thumbs forward gripper any sweat shield will work. Low thumbs forward grippers tend to like the low shield coverage. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next competition. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made. If you would like some other color scheme or a custom designed outer face then just Contact Us.$80.00
UltiClip Holster
The Ares Tactical UltiClip Holster takes our loved Bodyguard IWB Holster and updates it for the use with the UltiClip3 retention device. This clamp is so good you don’t need to wear a belt to secure your holster in place. We continue to use .080 thickness Kydex and Holstex for our holsters. That’s 33% thicker and much stronger that what a lot of other makers use. Yet, the Glock G19 holster with UltiClip only tips the scales at 3 ounces. Dual retention screws (most models) allows you to customize the effort need to draw the pistol from the IWB holster. The UltiClip can be moved to allow deep cover seating as well as very high on the belt line, though we don’t recommend placing it too high which increases the tendency to flop away from the body. It comes shipped to place the grip at your pants line. This allows you to establish a secure grip right away. The UltiClip Holster also allows you to customize the cant for your own personal needs. The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. This is a IWB Kydex Holster you can wear all day and love the comfort and security it offers. We have now added the option to order these with lights and lasers. Now you don’t have to contact us about a custom Kydex holster for the most popular weaponlights on the market like Surefire X300, XC1, and Streamlight TLR-1. Other models are available and as always you can send us your light if it is not listed As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. This is available as a option if you do not have any already.$65.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
Paddle Holster
Designed for comfortable all day carry, the Paddle Holster is far easier to put on and remove than a belt holster. Low cut sight channel aids in quickly clearing holster in getting on target. Flared top makes one-handed reholstering easy. The recurved wings on the paddle back help aid retention.$70.00
Hybrid Holster
Hybrid holsters have been very popular over the last decade. Providing the conforming nature of leather on the backside and the rugged form fitted Kydex on the outside blends the two spectrum’s of holster design. This is the Ares Tactical take featuring sturdy leather back and .080 Kydex. The Kydex Holster design allows you to have multiple shells and one leather backer. The opening is slightly flared to make holstering easier. The full wrap muzzle is standard. This protects the front sight from damage or become caught up on your clothes. As an added benefit it keeps your clothes clean from powder and oil from the slide and muzzle. Also, the wrapped muzzle reduces sharp edges and wear that can tear holes in your pants. Notice the rounded and treated edges of the leather. We take the extra time to do this because it makes carrying more comfortable and it looks good too. IWB Soft loops are a great option for those wanting something more secure that the traditional metal clips. The pull-the-dot snaps allow easy on and off. You can also choose tuckable injection molded belt clips. Cant angle can be fine tuned via front and back adjustment holes. Multiple shells are available for only $20. This allows you to use the same backer and reduce costs. Contact us for ordering. Don’t forget to check out our Ready to Ship page. This is where we list some overstock items (QS Quick Ship) as well as prototypes, blemished, and other non standard items (RS Ready Ship).$500.00
Weaponlight Holster
Depending on the figures you look at, between 60-85% of shootings occur in low light. When time is of the essence, having weapon light already mounted to your handgun could be the edge you need. Modeled similarly to The Standard Holster, the Weapon light holster can be configured for belt carry or inside-the-waistband (IWB). Pictured is a Sig Sauer P226 9mm with a Streamlight TLR-1 weapon light in OD Green. The base model comes in black with 1.75″ belt loops. Other color and attachment methods are available. The body of the holster is constructed of .080 Kydex or, for some finishes, Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people. Standard belt loops are made of very rigid .125 Kydex. Optional J-Hook or soft belt loops extends the versatility of this holster to be carried inside the waistband (IWB). Like the Standard Holster, the Weaponlight Holster has belt loop positions that allow four carry heights and different angles. The highest position of the belt loops allows the pistol to sit lowest on your belt. This will roughly place the trigger guard at the belt level. The belt loops can be dropped down to the next set of eyelets making for a slightly higher ride. Flipping the belt loops upside down with further raise the ride of the holster. Inverting the belt loops for a very high ride, as with any holster, should only be done with a stiff belt. As always , if you do not see your pistol, light, or bells and whistles listed below please contact us. We do a lot of custom work and strive to deliver just what you want. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$65.00