Product Description
The Belt Drop Holster is the happy place(ment) between having a belt holster and thigh holster. The mid drop design fits belts up to 2.25″ with an adjustable belt sizer. Holsters come shipped in the neutral vertical position but can be easily adjusted for forward or back cant angle with a standard Philips screwdriver.
Retention can adjusted via the 2-3 tension screws. Additional levels of security can be had with the Thumb Break option. This rubberized laminated webbing secures across the rear of the slide and is easy to manipulate under stress. This strap is also removable.
The single thigh strap helps stabilize the dropped holster. The leg strap features rubber anti-slip strips to minimize shifting while active. There is also an elastic webbing for additional comfort. This strap is also removable.
All holsters come mounted directly to the belt drop platform. We do offer a variety quick-release interchangeable hardware that allow your to swap holster quickly or the move your holster from one platform to another easily. Some of the more popular are the Blade-Tech TMMS, Safariland QLS, and G-Code RTI. Essentially they all serve the same function but are not interoperable between brands. One side mounts to the holster (Insert/fork/hanger) and the other mounts to platform (thigh panel/ belt slide, molle adapter) and this is usually called the plate. Is one any better than another? That’s a personal preference as they all have their own following. TMMS puts it off the body the least, RTI is the easiest to swap out. QLS is the most ubiquitous.
There is some adjustment in the holster placement in the Belt Drop dependent if you have a light selected. This can be 3/4″ to 1.5″
Additional holsters can be ordered by choosing our Molle Holster and Molle Weaponlight Holster. We try to provide the highest level of flexibility and cost savings. Just let us know at the time of order so we can pre-drill the correct hole spacing at no extra charge.
Related Products
Trigger Guard
Small and light protection for you double stack Glock in 9/40/357sig. This fits the G17,G18, G19, G22, G23, G26, G27, G31, G34, and G35. The ambidextrous design covers the trigger area helping to prevent accidental discharge. If you want an even smaller version check out the Micro Trigger Guard. Many people like to cover their trigger when concealing a pistol in a purse or backpack but do not want the added size or weight of a full size holster. Multiple attachment points can be used to use 550 cords or your own lanyard to tie the standard Trigger Guard to an anchor point. For IWB, inside the waistband, this could be your belt loop. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order.$25.00
SideKick Holster
Ares Tactical has made combination pistol and magazine IWB holsters for years by special order. There’s a pretty consistent pattern that several Kydex holster makers use. Our wasn’t that different in the basic design. We applied our critical eye on using the best materials and finishing, but essentially they looked and worked the same. The new SideKick holster is a first in its design. It takes up less belt room than the traditional style making it far more versatile in where you place it. Most pistol and mag holsters are limited to carrying in the front or AIWB (appendix Inside-the-belt). The Ares Tactical SideKick is small enough that some users will be able to place it anywhere including the strong side 3 o’clock position. The mag slot is built to handle full size magazines regardless of pistol size. Compact and subcompact magazines will fit deeper in the slot. User adjustable tension screws for both the pistol and magazine. This allows you to custom tune the draw effort needed for the pistol and magazine individually. Want even more versatility? Order the Ares Tactical SideKick Holster with UlitClips. These are a great upgrade and a most for those that need a secure IWB holster but don’t wear a belt. Mini FAQs: 1. Will the SideKick IWB holster work without a magazine? Yes, the SideKick is designed in a way that allows it to be used with or without a magazine placed in the slot. 2. Will this work with my Trijicon RMR (Burris Fast Fire, JP JPoint, etc.)? Generally, no. To keep the profile small we tuck the magazine slot close to the pistol. Some combinations of mini dot optics, mount, and compact magazines may work. 3. I see you make other holsters for my XDs 3.3 but not in the SideKick model. Why? The SideKick is made for many double stack pistols. Some double stack pistols and most single stack pistols do not work well with the intent of this design. 4. Is there an option for two or three magazines? No. Adding a second magazine substantially increases the relative size and severely restricts the versatility of the design. We recommend if you want to carry more magazine to get the Ares Tactical IWB Single Mag Carrier. 5. What are the optional deep seat clips? They are just like the regular clips but longer allowing up to one inch deeper concealment. Lead times and more FAQs can be found here. Don’t forget to check out our Ready Ship page with dozens of holsters and mag pouches already made.$120.00
Double Duty OWB IWB Holster
New! The Ares Tactical Double Duty Holster is two holsters in one. Key Features: • Rugged Kydex construction • Dual Tension screws (most models) for custom draw • Flared opening for easier holstering • Wrap Around Muzzle coverage protects the front sight • Made in the USA by Veterans Are you tire of having to compromise when buying a holster? Do you get the OWB or IWB or spend twice the money and get two? Is your box full of holsters to cover every carry method? Simplify life and get the Ares Tactical Double Duty Holster. This is available in a variety of colors and camouflage patterns. For OWB (Outside the waistband carry we use the BladeTeck Tek Lok. It is configurable for belts from 1.25 inches to 2.25 inches. You can also adjust the ride height and cant (forward and back). The back cant is popular with USPSA shooters and people looking for a crossdraw. The outside has a IWB overhook loop standard. The Ulticlip is popular available option for a minimal visual profile. It also allows you to carry the holster without wearing a belt or clipping inside your purse, pack, or double AR/AR mag pouch. The user can easily remove the side they don’t need at the time with a Philips head screwdriver. It take only seconds to swap back. The body of the holster is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to chemicals and environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best balance of properties. The .060 thickness will do the job but feels flimsy to most people and is not nearly as strong for an OWB holster. Ares Tactical offers 21 different color and pattern options as well as your custom image infused on Kydex. Something to fit in every environment whether is for conceal carry, out in the field, on the competition range, while on the job. True custom solutions for the discerning shooter. It’s like getting two holsters in one. If you don’t see your pistol listed below check out our updated Pistol and Revolver page.$75.00
Tanker Chest Holster
The Tanker Holster was born out of a need for a easy access system where traditional belt or thigh holsters were not practical. Classically seen worn by tankers and pilots, today you can still see these used by military personnel as well as backpackers, hikers, and atv off roaders. The Ares Tactical Tanker Chest Holster is based on the 1940’s US Military M7 Tanker Holster. We have designed in a lot of improvements including using weatherproof Kydex, allowing greater adjustability in sizing and retention. Additionally, we have designed the holster to be adjustable in the carry angle. It can be rotated to near horizontal. This allows for a more natural draw angle to fit your body. The Ares Tactical Tanker Chest Holster can also be configured in the M3 Tanker style that uses a single sling style loop Unlike the original military M3 and M7 Tanker Holsters, ours can be ordered in dozens of different firearms and colors. If you don’t see your pistol listed check out our pistols page to see if we have it or send us an email . All shoulder holsters ship with black hardware and straps. Optional Crye Multicam, Coyote Brown, OD Green, and other webbing colors can be substituted at additional cost. Like other Ares Tactical holsters, the Tanker is made in the USA, by veterans, using American made materials. God Bless America.$85.00
QS Weaponlight 1911 X300
Quick ship 1911 with Surefire X300 Ultra (x200/x300) WeaponLight Holster. Does not fit the new version X300 with side screw clamp mount. 1911 5″ (will fit most shorter versions such as the 4″ and 4.25″) Black Right Hand 1.75″ Injection Molded Belt Loops$70.00
Paddle Holster
Designed for comfortable all day carry, the Paddle Holster is far easier to put on and remove than a belt holster. Low cut sight channel aids in quickly clearing holster in getting on target. Flared top makes one-handed reholstering easy. The recurved wings on the paddle back help aid retention.$70.00
Competition Holster
Competition Holster for IDPA and USPSA Go to our new Competition Holster page. If you order on this page and not the new one linked above you will only get a Right Hand, Low Sweat Shield, and less options. The Competition Holster is perfect for IDPA and USPSA action shooting matches, general range use, or everyday carry. The low cut front allows the pistol to clear the holster faster and get on target sooner. If you measure time by the hundreths of a second this is the holster you want on your side. Dual retention screws lets you fine tune the draw effort. You can make this as secure as you want. Adjustment are made with a common Phillips screwdriver meeting IDPA requirements. A fully enclosed trigger guard meets all competitive sports rules and recommendations of most professional trainers. The low cut front is a popular feature. It allows you to clear the holster faster and get your muzzle pointed downrange sooner. This is also compatible with Trijicon RMR, Burris Fast Fire, and JP Rifles JPoint style slide mounted micro red dot sights. Our design meets the rules criteria for both IDPA (International Defensive Pistol Association) and USPSA (including Production Division) as well as many other shooting competitions. If you are not an IDPA or IPSC member you should look into them. Both are very welcoming to new shooters and great way to improve your skills. Multiple carry heights are possible with the Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. You can add a FBI 15 degree forward cant or a muzzle forward cant in it’s base position. A flared opening is added for safety and ease. This allows the shooter to holster the pistol easily without the need to point the muzzle at themselves to get it started into the holster. Muzzling yourself in IDPA, USPSA, or in general is forbidden. Order the single color or two-tone model. The single color uses only the Base Color Option. If you order Black or Gunmetal Grey you will be a heavier .93 Kydex. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. As a long time IDPA shooter (A054xx) and life member of USPSA (L26xx) we have heard that beep many times. We have also seen shooters held back because their holster was not suitable. I look forward to seeing you at the next IDPA competition. If you would like some other color scheme or a custom designed outer face then just Contact Us.$199.00
Bodyguard IWB Holster
The Bodyguard IWB Holster grew out of a need for a comfortable IWB (Inside the Waistband) holster that was highly concealable, reliable, and easy put on or take off. This Kydex holster is ambidextrous and can be configured for right and left hand carry. Wrap around muzzle design protects the muzzle, keeps your clothes cleaner, and is far more comfortable than exposed versions. The tuckable J-hook allows for full concealment with minimal hook showing. An optional pull-the-dot soft loop kit is available for $10. Also consider the new UltiClip. This is a great solution for those men and women who do not wear belts or want an even more concealed carry Kydex holster The body of the holster is constructed of .080 Kydex. This offers excellent resistance to environmental conditions as well as body sweat. Also normal atmospheric hot, cold, wet or dry will not harm your holster. Other thicknesses and colors are available as a custom order. Although we feel .080 offers the best properties. The .060 thickness will do the job but feels flimsy to most people and sometimes is a little more difficult to holster. The extra stiffness over the .060 is something IDPA competitors will appreciate. The J-hook made of very strong .125 Kydex. This style is also called an appendix carry holster. The minimal width of the wrap around construction lends itself to placing almost anywhere on the belt. The appendix carry refers to placing the holster forward of the hip bone or the 2 o’clock position for a right-handed shooter. It is equally well suited 3, 4, or 5 o’clock carry depending on your preference. This is a IWB Kydex Holster you can wear all day and love the comfort and security it offers. As with any screw hardware; it is recommended that after final set up is made that you use threadlocker on the screws to prevent accidental loosening. This is available as a option if you do not have any already.$60.00