Product Description
The Double Shell Holder is designed to get you quick access to two 12ga shot shells. The single centralized tension screw allows the user to fine tune the grip on your shells. This can give you the exact hold you need for vigorous combative activities or more casual field and range usage.
The Double Shell Holder uses Blade Tech Tek-Lok bet attachment. This highly versatile mount allows you to properly size it for belts up to 2.25″ wide. This is a vast improvement in stability over other designs that do not have adjustments for different belt widths. The width of the TekLok also provides stability left and right over skinny clip type holders. The holder is designed to allow easy access to the shells weather you choose to hinged Tek Lok on the top or bottom. While having the hinge of the clamshell style Tek Lok is most common some prefer the have the hinge on the bottom so that the locking mechanism faces up. Some find this easier to put on and take off the belt.
Using an optional Molle Clip or Molle-Lok will allow you to take the Double Shell Holder and mount it to your tactical vest, plate carrier, or battle belt.
The body of the shot shell holder is constructed of .080 Kydex or for some finishes Holstex. Both offer excellent resistance to environmental conditions. Hot, cold, wet or dry will not harm your holster. Other thicknesses are available as a custom order. Although we feel .080 offers the best properties in terms of durability and weight. The .060 thickness will do the job but feels flimsy to most people.
The picture above shows standard 2 3/4″ shotgun shells in the holder. You could use shorter shells or the longer 3″ and 3 1/2″ length rounds.
If you have any questions just reach out to us using the contact information at the bottom of the page.
Additional information
| Shotshell Gauge | 12 ga, 20 ga |
|---|
Related Products
LIC Rig
The LIC Rig is a great choice for those operating in one of the many Low Intensity Conflict (LIC) areas around the world. It provides the user with an easy way to conceal several AR15 or pistol magazines providing a full combat load. All of this in a convenient concealed carry solution. Escalating tensions domestically call for you to up your capabilities. The LIC Rig provides a compact and lightweight AR mag carrier that you can easily pack in a briefcase, backpack, or under your seat until needed. Donning this shoulder rig only takes seconds. The modular design allows you to be flexible in an ever changing environment. Additional panels are available for pistol mags, combination AR/pistol, and utility pocket for things like pocket med kits. You can also replace one side with a pistol holster from our Shoulder Holster parts. The X-Harness shoulder strap design provides good weight distribution as well as a carry adjustment. Adjustments to the mil-spec one inch webbing are easy to make. Swapping panels out only takes a minute. The original concept of the LIC Rig came from a customer who wanted something like what was used in the 1995 movie Heat. The bank robbery scene featured a vest that held six AR mags under a suit coat. While this works well if you are wearing a three piece suit it is not low profile in a lot of other scenarios. This shoulder harness combines the capacity of the original design with a solution that is easier to conceal. A note on sizing: Model is 6’2″ (187cm) and wears a Large/42L. Concealing 30rd AR magazines on small frame persons or improperly fitted rig can lead to printing . Take a few minutes and hold a mag on your side and check to see if this will be a good fit for you before ordering. Returns are subject to restocking fees$100.00
Mini Chest Rig Mag Carrier
The Mini Chest Rig Mag Carrier is a light weight solution to carry addition PCC magazines or rifle magazines. The forward or outer compartment features a zipper map pocket and space for essential gear like medical and survival. The cordura nylon carrier is available in Black, Coyote Brown, and OD Green. Mini Chest Rigs are great solutions for your vehicle or bump-in-the-night spare mags and medical. The back compartment is where we put the Kydex mag insert. This is a multi magazine unit holding three PCC Magazines. Mag inserts of made of rugged kydex which has several advantages over soft versions. The rigid Kydex mag holder keeps its shape when the magazine is removed. This makes inserting magazines easier. Each mag is held in place by dual retention screw. This lets the user custom tune the amount of hold on each magazine individually. Additionally, it will not wear out like bungee or elastic mag holders. Another advantage with Kydex is that it doesn’t retain water. Additional inserts can be ordered to easily switch between magazine platforms. These are held in place with hook and loop on both sides offering positive positioning in the pocket. We also offer Velco separators. These are simple fitted sheets of plastic that fit between the Mag Carrier insert and the hook and loop. This makes swapping out carriers much easier and placement of the carrier in the pocket a breeze. A loop panel on the outside allows the user to apply patches or other hook backed attachments. Its defining feature is its reversible clam-shell design, which allows the rig to be folded into a compact pouch for easy storage. The H-Harness fits most body types with the waist belt fitting up to 48″. Magazines and medical gear not included. Cordura Nylon chest rig is made in China. Kydex and insert are made by Ares Tactical in America.$46.00
Glock Knife Sheath v1
The Glock Field Knife is an excellent knife. There are many thousands in use around the world for good reason. The biggest complaint that most users have is the included sheath. It lacks various mounting options, is difficult to take out, and for some make too much noise. The Ares Tactical Glock Knife Sheath for the Glock M78 and M81 Field Knife solves these problems. We built a two piece sheath, sometimes called a pancake because of the layers looking like a stack of flapjacks. This design allow for many different mounting options. If you are wanting a molle clip, closed belt loop, IWB soft loop, or Ulticlip we have it for you. Attachment options are selected in the OPTIONS section below. The second most complained about problem with the factory knife sheath is the knife is too difficult to take out. This is especially true if you are wearing gloves. Knife retention is the most difficult issue to solve for a sheath. Too loose and you know that knife will probably be lost in the woods somewhere. To tight like the factory and you struggle to release it when you need it most. What the Ares Tactical Glock Knife Sheath has done is designed a sheath that locks in place but can easily be removed when you grip the handle and press the back locking tab. For those only wanting a friction fit that is an option. Another benefit of our design is the opening gives you more than a 50% increase in the opening at the top. This will make it easier to put you knife away. Like I say when holstering a pistol, it it still a good idea to look the knife into the sheath. No sense is stabbing your gear or self to save a second or two on securing the blade. Molding the Kydex to the knife provides a tighter fit to the blade. This reduces rattle or slap inside the sheath from the knife banging into the sheath. This also means anything hitting the outside of the sheath will be quieter too. These are molded for RIGHT HAND use. If you want a left hand version choose that in the options section. There are currently three width sizing on the Glock Knife Sheath V1. This helps you fine tune the sheath to your needs. The standard width is the narrowest width. Spacing is soley based on the width of the knife blade. Next wider option is the Standard Molle width. This is for attaching to the standard webbing stitched every 1.5″ wide. This gives you about 1.4″ room between the stitches. When you have something using laser cut molle slots the opening is about 1.1″ but still 1.5″ to the next opening. So, your wiggle room using standard 1″ wide straps is minimized. This means the Standard Molle Width snuggly fits in two MOLLE columns. The Laser Cut MOLLE take three vertical columns. Updated Option Feb 2024: We are now offering a steel pommel modification to Glock knives at time of purchase. This cold-blued steel pommel is great for crushing things with the butt of your knife or hammering in nails or tent stakes. It also gives you easier access to the storage area inside the handle. The added weight also shifts the balance from blade forward to the handle. This is change in balance is preferred by many knife fighters as it make changes in direction quicker. Our version of the sheath has a bottom and side drain hole. This allows plenty of drainage for when it gets wet. As with any knife you should dry and oil it as soon as possible if it gets wet. The standard sheath is about 3″ wide. There is a wider version that is about 3.8″ wide that allows both columns of eyelets to align with three width molle section.$40.00
PCC Mag Pouch
Tired of those big sticks not working well in your regular mag carrier? Is your PCC game suffering because your reloads are not as efficient as they could be? Ares Tactical’s PCC mag pouch is just what you have been looking for. This is a evolution of our well regarded Competition Mag Pouch. No longer will you have to worry if your magazines will stay in place on a stage with movement. No more 33 round mags be jacked up into your armpits. These are designed to fully encompass a full size magazine such as the Glock G17. When you use extended mags such as the MagPul Pmag21 and 33 round happy stick will allow easy grasping of the magazine. As of June 2017, we are only offering these for the Glock type magazines. Other magazine types will be added as demand dictates. Please feel free to contact us if you have a different magazine. UPDATE: August 2017, we have now added Beretta M9/Model 92 and UZI 9mm magazines to the available options. We will continue to add more as you all request for our PCC Magazine carriers. Two different mounting positions on your belt allow normal belt height or drop position allowing 1.5″ lower seating relative to the top of your belt. Three tension adjustment points go from gorilla grip to rattling bucket. Multiple carry heights are possible with the standard Tek-Loc belt adapter. It fits belts up to 2.25 inches. A standard 1.75” belt allows six carry height adjustments that can be locked in. Ares Tactical stock dozens of different colors, camo patterns, and textures such are carbon fiber. When ordering a single layer carrier use the Base color option. If you want a dual layer Kydex pouch the base will be inside and wrap will be the outer color. Fatback is not available in the PCC Mag Pouch. Though, the current system will let you order it. Don’t forget to order your matching Competition Pistol Holster here. You might as well look good while you are winning. Enjoy the best for your Pistol Caliber Carbine whether your compete in USPSA, IDPA, 2 gun, 3 gun, or outlaw matches. You can always check out lead time on the FAQ Tab.$45.00
Competition Mag Pouch GM edition
The Competition Mag Pouch GM Edition is perfect for action shooting matches, range use, or everyday carry. The perfect companion to our Competition Holster or use on it’s own. If you measure time by the hundereths of a second this is the Mag Pouch you want on your side. This special GM Edition was specially designed with the input of top level competitors looking to squeeze out every bit of advantage possible. A flair has been added to our standard speed chute to further expand the opening. This combined with the FatBack feature makes stowing magazines on the clock or in practice quick and effortless. Dual retention screws lets you fine tune the draw effort. The contact area with the magazine has been minimized for the quickest release possible. The low cut front is a popular feature allowing your finger to index on the front of the magazine. The belt clip is available in 1.5″ and 1.75″ (standard). The Speed Chute flared opening is added for easier inserting. This allows the shooter to return the magazine easily. A great feature especially appreciated by IDPA shooters. Order the single color or two-tone model. The single color uses only the Base Color Option. When ordering the dual color model select the inside Base Color then the outside shell wrap color. You will also need to choose an edge reveal. The FATBACK started with a conversation that began with, “Hey Matt, I’m kinda fat…” about our standard double mag pouch. He wanted a sweat guard that came up partially on the back side that made inserting magazines less painful if his Dunlap hung over the pouch opening. In playing with this idea we found that in combination with our speed chute flaring that inserting magazines became quick and effortless. That saves you time on the practice range. Also, we have seen several higher level matches start the stage off with magazines on the table and require you to stow them. This feature is great for that and is standard on the GM edition and an option on our regular competition mag pouches. If you would like some other color scheme or a custom designed outer face then just Contact Us.$50.00
Single IWB Mag Pouch
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each Single IWB Mag carrier features an adjustable tension screw so you can set it to your preference. If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch. When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right? There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish. As always, if you have a question please Contact Us.$30.00
Single Magazine Pouch
The Single Mag Pouch is a convenient way to carry a spare pistol magazine. It is available for a variety of pistol magazines as well as universal fit models. You know you should be carrying spare ammunition. Now you have no excuse with this compact and lightweight solution. Each pouch features Speed Chute. This flared opening allows easier insertion of magazines something that IDPA competitors will find very handy during a Loaded Chamber Reload (formerly known as Reload with Retention). For the non competitors its just easier to put mags in. If you are looking to carry a single magazine and flashlight you should check out are Mag/Light pouch. Here are some of the adjustment for ride height that is available with this Double Mag Pouch. The shorter “Competition” pouch will loose some/all adjust heights. Don’t forget you we also offer optional inside the waistband (IWB) J-Hooks or soft loops for deeper concealment solutions. When ordering you can specify righty or lefty. The Righty is worn on the left side with the bullets forward. If you wear the Righty on the right side the bullets will face backwards. The Lefty, when worn on the right side, will have the bullets facing forward. Easy enough, right? There are several IWB options available. These include the J-Hook, belt clip, and synthetic soft loops. You can order these now and save on shipping or later if you wish. As always, if you have a question please Contact Us.$30.00
